Composite Ceramic Based on Silicon Carbide
- Authors: Maung S.K.1, Popova N.A.1, Lukin E.S.1
-
Affiliations:
- FGBOU VO D. I. Mendeleev Chemical Technology University
- Issue: Vol 60, No 2 (2019)
- Pages: 201-203
- Section: Article
- URL: https://journals.rcsi.science/1083-4877/article/view/249276
- DOI: https://doi.org/10.1007/s11148-019-00335-9
- ID: 249276
Cite item
Abstract
An effective method for preparing dense granular ceramic from SiC with a residual porosity of less than 5.0% is the use of additives of oxide system eutectic compositions. The effect of fine eutectic powder in the Al2O3–MnO–SiO2 system depending on the composition of the charge, compaction pressure and firing temperature on the sintering performance of granular SiC ceramics, is considered. It is established that after firing ceramic at 1250°C with 15 wt.% of eutectic additive, its porosity is 4.2%, and the ultimate strength in bending reaches (95±5) MPa.
Keywords
About the authors
Soe Khin Maung
FGBOU VO D. I. Mendeleev Chemical Technology University
Author for correspondence.
Email: khinmgsoe53@gmail.com
Russian Federation, Moscow
N. A. Popova
FGBOU VO D. I. Mendeleev Chemical Technology University
Email: khinmgsoe53@gmail.com
Russian Federation, Moscow
E. S. Lukin
FGBOU VO D. I. Mendeleev Chemical Technology University
Email: khinmgsoe53@gmail.com
Russian Federation, Moscow