Enviar artigo por via de e-mail Influence of Autoclave Molding Modes and Stack Structure on Porosity of Composite Materials
- Autores: Batrakov V.V.1, Petrushenko R.Y.1, Konstantinov D.Y.1, Khamidullin O.L.1
-
Afiliações:
- Tupolev Kazan National Research Technical University
- Edição: Volume 61, Nº 1 (2018)
- Páginas: 90-94
- Seção: Aircraft Production Technology
- URL: https://journals.rcsi.science/1068-7998/article/view/230421
- DOI: https://doi.org/10.3103/S1068799818010142
- ID: 230421
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Influence of stack structure on porosity of composite materials at different modes of autoclave molding was studied. To reduce porosity of composite materials, specific stack structure and molding mode are recommended.
Palavras-chave
Sobre autores
V. Batrakov
Tupolev Kazan National Research Technical University
Autor responsável pela correspondência
Email: pla.kai@mail.ru
Rússia, ul. Karla Marksa 10, Kazan Tatarstan, 420111
R. Petrushenko
Tupolev Kazan National Research Technical University
Email: pla.kai@mail.ru
Rússia, ul. Karla Marksa 10, Kazan Tatarstan, 420111
D. Konstantinov
Tupolev Kazan National Research Technical University
Email: pla.kai@mail.ru
Rússia, ul. Karla Marksa 10, Kazan Tatarstan, 420111
O. Khamidullin
Tupolev Kazan National Research Technical University
Email: pla.kai@mail.ru
Rússia, ul. Karla Marksa 10, Kazan Tatarstan, 420111
Arquivos suplementares
