Development, research and production of a centrifugal impeller

Authors: Gureev V.M.¹, Salakhov R.R.¹, Falyakhov M.A.¹, Kudusov D.I.², Burlakov V.V.³
Affiliations:
1. Tupolev Kazan National Research Technical University
2. All-Russia Research Institute of Flow Metering (FGUP VNIIR)
3. OAO KAMAZ
Issue: Vol 59, No 1 (2016)
Pages: 69-76
Section: Aircraft and Rocket Engine Design and Development
URL: https://journals.rcsi.science/1068-7998/article/view/229569
DOI: https://doi.org/10.3103/S1068799816010116
ID: 229569

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

The authors conducted a detailed study of possible options for geometry of blades with pressure and power characteristics of the impeller.

centrifugal impeller, blade, pump, pressure

Tupolev Kazan National Research Technical University

Author for correspondence.
Email: viktor.gureev@kai.ru
Russian Federation, ul. Karla Marksa 10, Kazan, 420111

Tupolev Kazan National Research Technical University

Email: viktor.gureev@kai.ru
Russian Federation, ul. Karla Marksa 10, Kazan, 420111

Tupolev Kazan National Research Technical University

Email: viktor.gureev@kai.ru
Russian Federation, ul. Karla Marksa 10, Kazan, 420111

All-Russia Research Institute of Flow Metering (FGUP VNIIR)

Email: viktor.gureev@kai.ru
Russian Federation, ul. Vtoraya Azinskaya 7a, Kazan, 420088

OAO KAMAZ

Email: viktor.gureev@kai.ru
Russian Federation, pr. Avtozavodskii 2, Naberezhnye Chelny, 423827