| Edição |
Título |
Arquivo |
| Volume 37, Nº 12 (2017) |
Tools for Ultrasound Cleaning |
(Eng)
|
|
Dem’yanushko I., Kazantsev V., Karagodin V., Luzhnov Y., Prikhod’ko V.
|
| Volume 37, Nº 12 (2017) |
Surface Modification by Combined Thermochemical and Ultrasound Treatment |
(Eng)
|
|
Britvin L., Gaevskii V., Germanova V., Nigmetzyanov R., Prikhod’ko V.
|
| Volume 37, Nº 12 (2017) |
Classification and Calculation of Drive Loads |
(Eng)
|
|
Ivanov A., Fomin M.
|
| Volume 37, Nº 12 (2017) |
Antiwear Properties of Coatings on Artillery Barrels |
(Eng)
|
|
Vagin A., Albagachiev A., Sidorov M., Stavrovskii M.
|
| Volume 37, Nº 12 (2017) |
Additive Manufacturing with Ultrasound |
(Eng)
|
|
Nigmetzyanov R., Sundukov S., Fatyukhin D., Grib V., Kartsov S.
|
| Volume 37, Nº 11 (2017) |
Ease of cutting of high-chromium ferrite steels |
(Eng)
|
|
Adaskin A., Kirillov A., Maksimovskaya A., Nikishkin M.
|
| Volume 37, Nº 11 (2017) |
Efficiency of an inertial pulsed torque converter in a vehicle transmission |
(Eng)
|
|
Kondakov S.
|
| Volume 37, Nº 11 (2017) |
Evolution of methods of assessing the accuracy of metal-cutting machines. 2. Evolution of concepts and models used in assessing the accuracy of metal-cutting machines |
(Eng)
|
|
Kuznetsov A.
|
| Volume 37, Nº 11 (2017) |
MES-based management of manufacturing processes |
(Eng)
|
|
Solomentsev Y., Frolov E., Feofanov A.
|
| Volume 37, Nº 11 (2017) |
Torsional rigidity of freewheel mechanisms in drives |
(Eng)
|
|
Sharkov O., Koryagin S., Kalinin A.
|
| Volume 37, Nº 11 (2017) |
Predicting the effective thermal conductivity of multicomponent textured tribocomposites |
(Eng)
|
|
Lavrov I., Bardushkin V., Sychev A., Yakovlev V.
|
| Volume 37, Nº 11 (2017) |
Influence of cut layer on cutting |
(Eng)
|
|
Kabaldin Y., Kuz’mishina A., Zotov V., Vlasov E.
|
| Volume 37, Nº 11 (2017) |
Simulation of flexible manufacturing systems at the preliminary design stage |
(Eng)
|
|
Kul’ga K., Kitaev A.
|
| Volume 37, Nº 11 (2017) |
Optimization of the configuration of manufacturing systems |
(Eng)
|
|
Sergeev A., Serdyuk A., Kuznetsova V., Kondusov D.
|
| Volume 37, Nº 11 (2017) |
Simulation of the machining of a bush in the KOMPAS-3D system |
(Eng)
|
|
Shchekin A., Sul’din S., Mitin E.
|
| Volume 37, Nº 11 (2017) |
Superhigh-speed electric motors |
(Eng)
|
|
Vavilov V.
|
| Volume 37, Nº 11 (2017) |
Mathematical models for base calibration in industrial robots |
(Eng)
|
|
Krakhmalev O., Petreshin D., Fedonin O.
|
| Volume 37, Nº 11 (2017) |
Glass-filled polyurethane in manufacturing |
(Eng)
|
|
Gumerov I., Lakhno A., Shafigullin L., Yurasov S., Shafigullina G., Shafigullina A.
|
| Volume 37, Nº 11 (2017) |
Efficient hydroabrasive cutting with swirling of the liquid jet |
(Eng)
|
|
Iznairov B., Davidenko O., Reshetnikova O., Ivanov V., Bondarev A., Konovalov V., Prikazchikov S., Melent’ev V., Shalunov V., Vasin A.
|
| Volume 37, Nº 11 (2017) |
Influence of abrasive-tool overrun on the shape error |
(Eng)
|
|
Vasin A., Iznairov B., Davidenko O., Reshetnikova O., Ivanov V., Bondarev A., Konovalov V., Prikazchikov S., Melent’ev V., Shalunov V.
|
| Volume 37, Nº 11 (2017) |
Design of grinding plates for a universal grinding machine |
(Eng)
|
|
Safarov D., Kondrashov A., Faskhutdinov A., Zairov B.
|
| Volume 37, Nº 11 (2017) |
Rapid assessment of wear-resistant tool coatings |
(Eng)
|
|
Kas’yanov S., Kondrashov A., Safarov D.
|
| Volume 37, Nº 10 (2017) |
Fuel preparation and combustion in rocket and jet engines |
(Eng)
|
|
Brenn G., Kozlov A., Borovik I., Strokach E.
|
| Volume 37, Nº 10 (2017) |
Wear resistance of cutting tools with a plasma-modified surface layer |
(Eng)
|
|
Brzhozovskii B., Zinina E., Martynov V., Pleshakova E.
|
| Volume 37, Nº 10 (2017) |
Optimal cutting time and speed in abrasive lapping of ceramic |
(Eng)
|
|
Makarov V., Muratov K., Gashev E.
|
| 526 - 550 de 991 resultados |
<< < 17 18 19 20 21 22 23 24 25 26 > >>
|
