Enviar artigo por via de e-mail Additive Manufacturing with Ultrasound
- Autores: Nigmetzyanov R.I.1, Sundukov S.K.1, Fatyukhin D.S.1, Grib V.V.1, Kartsov S.K.1
-
Afiliações:
- MADI Moscow State Technical University of Vehicles and Roads
- Edição: Volume 37, Nº 12 (2017)
- Páginas: 1070-1073
- Seção: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/227200
- DOI: https://doi.org/10.3103/S1068798X17120140
- ID: 227200
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Additive manufacturing methods are briefly reviewed. Proposals are outlined for the use of ultrasound in fused deposition modeling (FDM) and selective laser melting (SLM). Approaches to ultrasonic additive manufacturing (UAM) are discussed.
Palavras-chave
Sobre autores
R. Nigmetzyanov
MADI Moscow State Technical University of Vehicles and Roads
Autor responsável pela correspondência
Email: lefmo@yandex.ru
Rússia, Moscow
S. Sundukov
MADI Moscow State Technical University of Vehicles and Roads
Email: lefmo@yandex.ru
Rússia, Moscow
D. Fatyukhin
MADI Moscow State Technical University of Vehicles and Roads
Email: lefmo@yandex.ru
Rússia, Moscow
V. Grib
MADI Moscow State Technical University of Vehicles and Roads
Email: lefmo@yandex.ru
Rússia, Moscow
S. Kartsov
MADI Moscow State Technical University of Vehicles and Roads
Email: lefmo@yandex.ru
Rússia, Moscow
Arquivos suplementares
