Enviar artigo por via de e-mail Phase Composition, Mechanical and Tribological Properties of Ti–Al–N System Coatings Deposited by Vacuum-Arc Method
- Autores: Posylkina O.I.1, Latushkina S.D.1, Komarovskaya V.M.2
-
Afiliações:
- The Physical-Technical Institute of the National Academy of Sciences of Belarus
- Belarus National Technical University
- Edição: Volume 40, Nº 3 (2019)
- Páginas: 234-238
- Seção: Article
- URL: https://journals.rcsi.science/1068-3666/article/view/229295
- DOI: https://doi.org/10.3103/S1068366619030103
- ID: 229295
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The results of the phase composition, mechanical and tribological properties of the vacuum arc (Ti,Al)N coatings using separated plasma flows are presented in this work. It has been determined that the formed Ti–Al–N coatings are of a nanoscale structure and characterized by high hardness and resistance to deformation, low friction coefficient. This allows for the use of such coatings for products operating under conditions of increased abrasive and adhesive wear.
Sobre autores
O. Posylkina
The Physical-Technical Institute of the National Academy of Sciences of Belarus
Autor responsável pela correspondência
Email: phti@tut.by
Belarus, Minsk, 22014
S. Latushkina
The Physical-Technical Institute of the National Academy of Sciences of Belarus
Email: phti@tut.by
Belarus, Minsk, 22014
V. Komarovskaya
Belarus National Technical University
Email: phti@tut.by
Belarus, Minsk, 220013
Arquivos suplementares
