Efficiency Analysis of a Cycloid Reducer Considering Tolerance
- 作者: Pham A.1, Ahn H.2
-
隶属关系:
- Department of Software Convergence
- Department of Mechanical Engineering
- 期: 卷 38, 编号 6 (2017)
- 页面: 490-496
- 栏目: Article
- URL: https://journals.rcsi.science/1068-3666/article/view/228936
- DOI: https://doi.org/10.3103/S1068366617060113
- ID: 228936
如何引用文章
详细
High precision reducers such as cycloid reducers have been used to meet the mechanical system requirements of industrial robots for advantages such as: high reduction ratio, large torque capability, and high efficiency. Although efficiency of reducers is one of important performances, there are few studies on efficiency of a cycloid reducer considering its tolerance. This paper presents efficiency analysis of a cycloid reducer with tolerance using the approximate force distribution of an ideal cycloid reducer. First, we present an FE analysis of a cycloid reducer with tolerances. Then, we approximate force distribution of the cycloid reducer with tolerance using an ideal cycloid reducer without any tolerance. The approximated force distribution of the cycloid reducer can be easily calculated using the theory of the ideal cycloid reducer. Finally, efficiency analysis of the cycloid reducer is performed using the approximate force distribution. Tolerance has great effect on efficiency on a cycloid reducer.
作者简介
Anh-Duc Pham
Department of Software Convergence
Email: ahj123@ssu.ac.kr
韩国, Seoul
Hyeong-Joon Ahn
Department of Mechanical Engineering
编辑信件的主要联系方式.
Email: ahj123@ssu.ac.kr
韩国, Seoul
补充文件
