Examination of the coating of a cutting tool based on measurements microhardness and scratch tests
- Авторлар: Kaczyński R.1, Hościło B.1
-
Мекемелер:
- Bialystok University of Technology
- Шығарылым: Том 38, № 2 (2017)
- Беттер: 108-114
- Бөлім: Article
- URL: https://journals.rcsi.science/1068-3666/article/view/228642
- DOI: https://doi.org/10.3103/S1068366617020118
- ID: 228642
Дәйексөз келтіру
Аннотация
Methods of measuring and analyzing the wear resistance of the cutting tool coatings have been described in the article. Physical and mechanical properties of the surface has been determined by measuring the Vickers hardness test and based on the Oliver–Pharr model. Surface scratch test was performed with a variable load. Profilometry of the surfaces was carried out before the scratch test and the resulting scratches along. The quality of the coatings applied on the surface has been estimated.
Негізгі сөздер
Авторлар туралы
R. Kaczyński
Bialystok University of Technology
Хат алмасуға жауапты Автор.
Email: r.kaczynski@pb.edu.pl
Польша, Bialystok, 15–351
B. Hościło
Bialystok University of Technology
Email: r.kaczynski@pb.edu.pl
Польша, Bialystok, 15–351
Қосымша файлдар
