Dry friction of pure aluminum against steel


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

The behavior of aluminum during dry friction against a steel disk is studied. It has been found that, in the course of dry friction, severe wear of the surfaces of both materials occurs. With an increase in the applied pressure, the wear intensity of the friction pair grows, while the coefficient of friction decreases. The examination of the structure of the subsurface layers of the aluminum specimens has shown that the deformation that occurs in these layers makes a substantial contribution to the wear of these specimens.

Sobre autores

N. Rusin

Institute of Strength Physics and Materials Science, Siberian Branch

Email: skoralexan@mail.ru
Rússia, pr. Akademicheskii 2/4, Tomsk, 634055

A. Skorentsev

Institute of Strength Physics and Materials Science, Siberian Branch; Tomsk Polytechnic University

Autor responsável pela correspondência
Email: skoralexan@mail.ru
Rússia, pr. Akademicheskii 2/4, Tomsk, 634055; pr. Lenina 30, Tomsk, 634050

E. Kolubaev

Institute of Strength Physics and Materials Science, Siberian Branch; Tomsk Polytechnic University

Email: skoralexan@mail.ru
Rússia, pr. Akademicheskii 2/4, Tomsk, 634055; pr. Lenina 30, Tomsk, 634050

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Allerton Press, Inc., 2016