Email this article The Features of the Characteristics of Artificial Magnetic Conductors Based on Band-Stop and Band-Pass Frequency-Selective Surfaces
- Authors: Kazantsev Y.N.1, Kraftmakher G.A.1, Mal’tsev V.P.1
-
Affiliations:
- Kotelnikov Institute of Radio Engineering and Electronics (Fryazino Branch), Russian Academy of Sciences
- Issue: Vol 64, No 9 (2019)
- Pages: 945-951
- Section: Electrodynamics and Wave Propagation
- URL: https://journals.rcsi.science/1064-2269/article/view/201139
- DOI: https://doi.org/10.1134/S1064226919080096
- ID: 201139
Cite item
Open Access
Access granted
Subscription Access
Abstract
Artificial magnetic conductors (AMCs) based on band-stop and band-pass frequency-selective surfaces (FSSs) have been considered. Analytical expressions relating the AMC characteristics (position and operating bandwidth) and the FSS characteristics (resonance frequency and quality factor) have been obtained. Numerical calculations for specific FSS structures (with square and dumbbell-shaped slots) confirmed that the AMC characteristics can be estimated using analytical expressions. It has experimentally been proved that the AMC characteristics can be controlled by varying the FSS resonance frequency.
About the authors
Yu. N. Kazantsev
Kotelnikov Institute of Radio Engineering and Electronics (Fryazino Branch), Russian Academy of Sciences
Author for correspondence.
Email: yukazantsev@mail.ru
Russian Federation, Fryazino, Moscow oblast, 141190
G. A. Kraftmakher
Kotelnikov Institute of Radio Engineering and Electronics (Fryazino Branch), Russian Academy of Sciences
Email: yukazantsev@mail.ru
Russian Federation, Fryazino, Moscow oblast, 141190
V. P. Mal’tsev
Kotelnikov Institute of Radio Engineering and Electronics (Fryazino Branch), Russian Academy of Sciences
Email: yukazantsev@mail.ru
Russian Federation, Fryazino, Moscow oblast, 141190
