Pesquisa

Edição
Título
Autores
Power Required in the Plastic Deformation of Metallic Powder Materials
Makarov E., Cheglov A., Gvozdev A., Zhuravlev G., Sergeev N., Yusupov V., Gubanov O., Kazakov M., Breki A.
Nanohardness of wear-resistant surfaces after electron-beam treatment
Kormyshev V., Ivanov Y., Gromov V., Konovalov S., Teresov A.
State of Ni–Cr–B–Si–Fe/WC coatings after plasma powder surfacing with nanopowder modifier
Smirnov A., Kozlov E., Radchenko M., Knyaz’kov K., Knyaz’kov V.
Performance of Surface Layers Applied by New Powder Wire in Highly Abrasive Wear
Kryukov R., Usol’tsev A., Kozyrev N., Bashchenko L., Osetkovskii I.
Optimal concentration of nanostructured powder in protective gas
Barannikova S., Shlyakova G., Zernin E., Kuznetsov M.
Influence of deformation and heat treatment on the hardness of cold-rolled ПХ23Ю5 steel pipe
Skachkov O., Trofimenko N., Pozharov S., Dyatlenko V.
Creation of a Wear-Resistant Tungsten-Carbide Surface Layer on Carbon Steels by Implantation and Electromechanical Machining
Gorlenko A., Davydov S., Shevtsov M., Boldyrev D.
Wear-resistant amorphous-alloy nanocoatings for press components
Rakhmanov S., Srebryanskii G.
Decomposition kinetics of supercooled austenite in porous powder steel
Ivashko A., Tsyganova M., Nabatov R.
Reduction of Tungsten from Its Oxide in Surfacing by Means of Powder-Core Wire
Kozyrev N., Kryukov R., Shurupov V., Kibko N., Bashchenko L.
Composition of C–Si–Mn–Cr–W–V powder wire and quality of surfacing
Kozyrev N., Kibko N., Umanskii A., Titov D., Bashchenko L.
Coal gasification in a system with a damped circulating fluidized bed
Dubinin A., Mavrin S.
Synthesis of Fine Vanadium-Carbide (VC0.88) Powder Using Carbon Nanofiber
Popov M., Maksimovskii E., Netskina O., Krutskii Y., Tyurin A.
New C–Si–Mn–Cr–V–Mo powder wires for roller surfacing
Kozyrev N., Kibko N., Umanskii A., Titov D., Nikitin A.
Thermodynamic Assessment of the Reduction of WO3 by Carbon and Silicon
Bendre Y., Goryushkin V., Kryukov R., Kozyrev N., Bashchenko L.
Interaction of iron and aluminum in the plastic deformation and fast heating of laminar Fe–Al composite
Kontsevoi Y., Meilakh A., Shubin A., Pastukhov E., Sipatov I.
Using Small Particles with High Moisture Content in Iron Production by Liquid-Phase Reduction
Gudim Y., Tokovoi O.
The development of new metallurgical materials and technologies. Part 2. Powder nanomaterials
Leont’ev L., Alymov M.
1 - 18 de 18 resultados
Dicas:
  • Palavras-chave são sensíveis a maiúsculas
  • Preposições e conjunções ingleses são ignoradas
  • Busca é feita por todos os palavras-chave (agente AND experimentador) por omissão
  • Use OR para pesquisar um termo exato, ex.: educação OR formação
  • Use parênteses para criar frases complexas, ex.: arquivo de ((revistas OR conferências) NOT teses)
  • Para pesquisar uma frase precisa use aspas duplas, ex.: "investigações científicas"
  • Exclua uma palavra utilizando o sinal - (hífen) ou operador NOT; ex.: concurso-de beleza ou concurso NOT de beleza
  • Use * como caractere-coringa, ex.: científic* recuperará as palavras "científico", "científicos", etc.

Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies