Interaction of iron and aluminum in the plastic deformation and fast heating of laminar Fe–Al composite
- Authors: Kontsevoi Y.V.1, Meilakh A.G.1, Shubin A.B.1, Pastukhov E.A.1, Sipatov I.S.1
-
Affiliations:
- Institute of Metallurgy, Ural Branch
- Issue: Vol 46, No 7 (2016)
- Pages: 529-531
- Section: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/178894
- DOI: https://doi.org/10.3103/S0967091216070093
- ID: 178894
Cite item
Abstract
The influence of plastic deformation and the heating rate on the solid-phase interaction of steel strip and aluminum powder is investigated. Recrystallization of the contacting materials determines the phase formation. The layer thickness of the Fe–Al intermetallides is plotted as function of the strain and heating rate. On that basis, the parameters of the transition layer may be predicted in selecting the technological conditions.
About the authors
Yu. V. Kontsevoi
Institute of Metallurgy, Ural Branch
Email: meilach_imet@mail.ru
Russian Federation, Yekaterinburg
A. G. Meilakh
Institute of Metallurgy, Ural Branch
Author for correspondence.
Email: meilach_imet@mail.ru
Russian Federation, Yekaterinburg
A. B. Shubin
Institute of Metallurgy, Ural Branch
Email: meilach_imet@mail.ru
Russian Federation, Yekaterinburg
E. A. Pastukhov
Institute of Metallurgy, Ural Branch
Email: meilach_imet@mail.ru
Russian Federation, Yekaterinburg
I. S. Sipatov
Institute of Metallurgy, Ural Branch
Email: meilach_imet@mail.ru
Russian Federation, Yekaterinburg