Pesquisa

Edição
Título
Autores
Volume 48, Nº 2 (2018)
Influence of the Final Rolling Temperatures on the Relation between the Composition and the Mechanical Properties of K60 Pipe Steel
Gorbatenko V., Petrushchak S.
PDF
(Eng)
Volume 47, Nº 4 (2017)
Reducing the edge deformation of thin electrical steel sheet
Loginov Y., Puzanov M., Uritskii A.
PDF
(Eng)
Volume 46, Nº 8 (2016)
Forging and pressing technology at PAO Ruspolimet
Marchuk V., Chuchkov A., Martynov S.
PDF
(Eng)
Volume 46, Nº 1 (2016)
Fast replacement of submersible tundish nozzles in a continuous slab-casting machine
Eron’ko S., Oshovskaya E., Tkachev M.
PDF
(Eng)
Volume 49, Nº 10 (2019)
Changes in Pipe Geometry in the Course of Sequential Creation of Stresses on the Inner Surface under External Thermomechanical Impacts
Chumanov I., Kozlov A., Matveeva M.
PDF
(Eng)
Volume 49, Nº 8 (2019)
Use of the Multiple Regression Analysis for Quantitative Estimation of the Mechanical Properties of Strengthened Rebars
Kanaev A., Reshetkina E., Kanaev A.
PDF
(Eng)
Volume 49, Nº 5 (2019)
Influence of the Reduction in the First Matched Groove Pair of a Three-High Stand on Billet Damage
Smirnov E., Smirnov A., Sklyar V., Mikheev V., Belevitin V., Pivovarov R.
PDF
(Eng)
Volume 48, Nº 8 (2018)
Regulating the Coil Stress by Adjusting the Rigidity of the Winding Drum
Mazur V., Timoshenko V., Prikhod’ko I.
PDF
(Eng)
Volume 46, Nº 7 (2016)
Surface-crack formation in the two-phase region when rolling thick microalloyed-steel sheet
Kolbasnikov N., Zotov O., Matveev M., Glukhov P., Korchagin A.
PDF
(Eng)
Volume 49, Nº 8 (2019)
Experience in the Development of Production of Rolled Stock from Microalloyed Steels for Shipbuilding by NLMK DanSteel
Goli-Oglu E.
PDF
(Eng)
Volume 49, Nº 4 (2019)
Influence of Vanadium on Carbide Deposition in the Working Layer of ICDP Iron Rollers
Vdovin K., Koptseva N., Gorlenko D., Feoktistov N., Kuryaev D.
PDF
(Eng)
Volume 48, Nº 7 (2018)
Frictional-Stress Distribution in the Deformation Zone on Cold Rolling
Kozhevnikova I., Bolobanova N., Yusupov V., Kozhevnikov A., Kroitor E.
PDF
(Eng)
Volume 47, Nº 3 (2017)
Formation of internal structure in the rolling of a bcc (110)[001] single crystal
Redikul’tsev A., Uritskii A., Puzanov M., Belyaevskikh A.
PDF
(Eng)
Volume 46, Nº 5 (2016)
Defect healing in the axial zone of continuous-cast billet
Smyrnov Y., Skliar V., Belevitin V., Shmyglya R., Smyrnov O.
PDF
(Eng)
Volume 49, Nº 8 (2019)
Efficient Cold Rolling and Coiling Modes
Mazur V., Timoshenko V., Prikhodko I.
PDF
(Eng)
Volume 49, Nº 4 (2019)
Production of Heavy Plates of Pipe Steel with Increased Strength and Cold Resistance on the 5000 Rolling Mill at PJSC MMK
Denisov S., Stekanov P., Poletskov P., Gushchina M., Nikitenko O.
PDF
(Eng)
Volume 48, Nº 1 (2018)
Ensuring Specified Surface Roughness in the Production of Thin Cold-Rolled Steel Sheet
Mazur V.
PDF
(Eng)
Volume 47, Nº 6 (2017)
Failure of large-diameter steel pipe with rolling scabs
Shinkin V.
PDF
(Eng)
Volume 46, Nº 12 (2016)
Production of corrosion-resistant S420K2W and S460K2W structural steel
Goli-Oglu E.
PDF
(Eng)
51 - 69 de 69 resultados << < 1 2 3 
Dicas:
  • Palavras-chave são sensíveis a maiúsculas
  • Preposições e conjunções ingleses são ignoradas
  • Busca é feita por todos os palavras-chave (agente AND experimentador) por omissão
  • Use OR para pesquisar um termo exato, ex.: educação OR formação
  • Use parênteses para criar frases complexas, ex.: arquivo de ((revistas OR conferências) NOT teses)
  • Para pesquisar uma frase precisa use aspas duplas, ex.: "investigações científicas"
  • Exclua uma palavra utilizando o sinal - (hífen) ou operador NOT; ex.: concurso-de beleza ou concurso NOT de beleza
  • Use * como caractere-coringa, ex.: científic* recuperará as palavras "científico", "científicos", etc.