Frictional-Stress Distribution in the Deformation Zone on Cold Rolling
- Authors: Kozhevnikova I.A.1, Bolobanova N.L.1, Yusupov V.S.2, Kozhevnikov A.V.1, Kroitor E.N.3
-
Affiliations:
- Cherepovets State University
- Baikov Institute of Metallurgy and Materials Science
- PAO Severstal’
- Issue: Vol 48, No 7 (2018)
- Pages: 454-457
- Section: Article
- URL: https://journals.rcsi.science/0967-0912/article/view/180215
- DOI: https://doi.org/10.3103/S0967091218070100
- ID: 180215
Cite item
Abstract
The influence of the operating conditions on the frictional-stress distribution in the deformation zone on cold rolling is studied numerically on the basis of DEFORM-2D software. By adjusting the rolling conditions so as to regulate the tangential stress, the surface contamination of the strip may be decreased.
About the authors
I. A. Kozhevnikova
Cherepovets State University
Email: yusupov@aport2000.ru
Russian Federation, Cherepovets, 162600
N. L. Bolobanova
Cherepovets State University
Email: yusupov@aport2000.ru
Russian Federation, Cherepovets, 162600
V. S. Yusupov
Baikov Institute of Metallurgy and Materials Science
Author for correspondence.
Email: yusupov@aport2000.ru
Russian Federation, Moscow, 119991
A. V. Kozhevnikov
Cherepovets State University
Email: yusupov@aport2000.ru
Russian Federation, Cherepovets, 162600
E. N. Kroitor
PAO Severstal’
Email: yusupov@aport2000.ru
Russian Federation, Cherepovets, 162608