Application of Protective Technological Coatings under Low-Temperature Deformation of Hard-to-Deform Alloy Blanks

S. N. Polyanskii; Полянский С. Н.; S. V. Butakov; Бутаков С. В.; A. M. Antimonov; Антимонов А. М.; I. S. Ol’kov; Ольков И. С.; V. A. Aleksandrov; Александров В. А.

doi:10.31857/S0235711923040119

Application of Protective Technological Coatings under Low-Temperature Deformation of Hard-to-Deform Alloy Blanks

Authors: Polyanskii S.N.¹, Butakov S.V.², Antimonov A.M.², Ol’kov I.S.², Aleksandrov V.A.³
Affiliations:
1. Innovative Technologies Company, LLC
2. Yeltsin Ural Federal University
3. Ural State Agrarian University
Issue: No 4 (2023)
Pages: 75-82
Section: НОВЫЕ ТЕХНОЛОГИИ В МАШИНОСТРОЕНИИ
URL: https://journals.rcsi.science/0235-7119/article/view/137603
DOI: https://doi.org/10.31857/S0235711923040119
EDN: https://elibrary.ru/XVZWHJ
ID: 137603

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

Protective technological coatings for low-temperature deformation of semi-finished products and products from hard-to-deform alloys (titanium, zirconium, etc.) are considered. The process of low-temperature isometric product deformation made of the VT6 alloy, friction, and the separating properties of protective technological coatings are studied by compression of ring samples. Laboratory studies and industrial tests of pilot batches of coatings are carried out. Recommendations on the use of protective technological coatings are presented

Keywords

titanium, protective technological coatings, upsetting, isotherm

References

Avitzur B. Handbook of metal-forming processes. New York: Wiley, 1983. 1020 p.
Хайнике Г. Трибохимия. Пер. с англ. М.: Мир, 1987. 584 с.
Кокрофт М.Г. Смазка в процессах обработки металлов давлением. М.: Металлургия, 1970. 111 с.
Солнцев С.С. Защитные покрытия металлов при нагреве. Справочное пособие. Изд. 2, доп. М.: URSS, 2009. 248 с.
Манегин Ю.В., Анисимова И.В. Стеклосмазки и защитные покрытия для горячей обработки металлов. М.: Металлургия, 1978. 224 с.
Sejournet J. US Patent 3039888. Method of Coating the Bore of a Heated Hollow, 1966.
Standard BAE APB 3 – 1108. British Aerospace PLC. Protective coating. GB, 1993. Iss. 1. 10 c.
Zhu Y., Zeng W., Ma X., Tai Q., Li Z., Li X. Determination of the friction factor of Ti-6Al-4V titanium alloy in hot forging by means of ring-compression test using FEM // Tribology Int. 2011. V. 44 (12). P. 2074.
Male A.T. Friction measurement using the ring compression test // In Proceedings of the Seventh ICTP Conf. 1, 2002. P. 321.
Martin F. et al. The Ring Compression Test: Analysis of Dimensions and Canonical Geometry // Procedia Engineering. 2015. V. 132. P. 326.
Rajesh E., SivaPrakash M. Analysis of friction factor by employing the ring compression test under different lubricants // Int. J. of Scientific & Engineering Research. 2013. V. 4. Iss. 5. P. 1163.
Galdos L. et al. Characterization of Ti64 forging friction factor using ceramic coatings and different contact conditions // Procedia Engineering. 2017. V. 207. P. 2239.
Li L.X., Peng D.S., Liu J.A., Liu Z.Q. An experiment study of the lubrication behavior of graphite in hot compression tests of Ti–6Al–4V alloy // J. of Materials Processing Technology. 2001. V. 112 (1). P. 1.