Application of Protective Technological Coatings under Low-Temperature Deformation of Hard-to-Deform Alloy Blanks

S. N. Polyanskii; Полянский С. Н.; S. V. Butakov; Бутаков С. В.; A. M. Antimonov; Антимонов А. М.; I. S. Ol’kov; Ольков И. С.; V. A. Aleksandrov; Александров В. А.

doi:10.31857/S0235711923040119

Application of Protective Technological Coatings under Low-Temperature Deformation of Hard-to-Deform Alloy Blanks

作者: Polyanskii S.¹, Butakov S.², Antimonov A.², Ol’kov I.², Aleksandrov V.³
隶属关系:
1. Innovative Technologies Company, LLC
2. Yeltsin Ural Federal University
3. Ural State Agrarian University
期: 编号 4 (2023)
页面: 75-82
栏目: НОВЫЕ ТЕХНОЛОГИИ В МАШИНОСТРОЕНИИ
URL: https://journals.rcsi.science/0235-7119/article/view/137603
DOI: https://doi.org/10.31857/S0235711923040119
EDN: https://elibrary.ru/XVZWHJ
ID: 137603

如何引用文章

全文:

开放存取

##reader.subscriptionAccessGranted##
受限制的访问

订阅存取

详细
作者简介
参考
补充文件
统计

详细

Protective technological coatings for low-temperature deformation of semi-finished products and products from hard-to-deform alloys (titanium, zirconium, etc.) are considered. The process of low-temperature isometric product deformation made of the VT6 alloy, friction, and the separating properties of protective technological coatings are studied by compression of ring samples. Laboratory studies and industrial tests of pilot batches of coatings are carried out. Recommendations on the use of protective technological coatings are presented

关键词

titanium, protective technological coatings, upsetting, isotherm

参考

Avitzur B. Handbook of metal-forming processes. New York: Wiley, 1983. 1020 p.
Хайнике Г. Трибохимия. Пер. с англ. М.: Мир, 1987. 584 с.
Кокрофт М.Г. Смазка в процессах обработки металлов давлением. М.: Металлургия, 1970. 111 с.
Солнцев С.С. Защитные покрытия металлов при нагреве. Справочное пособие. Изд. 2, доп. М.: URSS, 2009. 248 с.
Манегин Ю.В., Анисимова И.В. Стеклосмазки и защитные покрытия для горячей обработки металлов. М.: Металлургия, 1978. 224 с.
Sejournet J. US Patent 3039888. Method of Coating the Bore of a Heated Hollow, 1966.
Standard BAE APB 3 – 1108. British Aerospace PLC. Protective coating. GB, 1993. Iss. 1. 10 c.
Zhu Y., Zeng W., Ma X., Tai Q., Li Z., Li X. Determination of the friction factor of Ti-6Al-4V titanium alloy in hot forging by means of ring-compression test using FEM // Tribology Int. 2011. V. 44 (12). P. 2074.
Male A.T. Friction measurement using the ring compression test // In Proceedings of the Seventh ICTP Conf. 1, 2002. P. 321.
Martin F. et al. The Ring Compression Test: Analysis of Dimensions and Canonical Geometry // Procedia Engineering. 2015. V. 132. P. 326.
Rajesh E., SivaPrakash M. Analysis of friction factor by employing the ring compression test under different lubricants // Int. J. of Scientific & Engineering Research. 2013. V. 4. Iss. 5. P. 1163.
Galdos L. et al. Characterization of Ti64 forging friction factor using ceramic coatings and different contact conditions // Procedia Engineering. 2017. V. 207. P. 2239.
Li L.X., Peng D.S., Liu J.A., Liu Z.Q. An experiment study of the lubrication behavior of graphite in hot compression tests of Ti–6Al–4V alloy // J. of Materials Processing Technology. 2001. V. 112 (1). P. 1.