检索

期
标题
作者
卷 2017, 编号 4 (2017)
Ensemble of secondary cracks near the fatigue fracture surface of a titanium alloy VT23M specimen
Lavrov A., Erasov V., Nochovnaya N., Kotova E.
PDF
(Eng)
卷 2017, 编号 4 (2017)
Development of short fatigue cracks in aluminum alloy 2524-T3 specimens
Botvina L., Nesterenko G., Soldatenkov A., Demina Y., Sviridov A.
PDF
(Eng)
卷 2019, 编号 5 (2019)
Development of Fatigue Damages in a Pseudo-α-Titanium Alloy after Intense Thermomechanical Treatment
Bagmutov V., Vodop’yanov V., Zakharov I., Vdovenko A., Romanenko M., Chekunov V.
PDF
(Eng)
卷 2017, 编号 4 (2017)
Estimation of the resistance to the initiation of fatigue cracks in the welded joints of steel constructions
Odesskii P., Shuvalov A., Emel’yanov O.
PDF
(Eng)
卷 2019, 编号 5 (2019)
Effect of Overload on the Near-Threshold Fatigue Crack Growth Rate in a 2024-T3 Aluminum Alloy: II. Fatigue Crack Growth Simulation for Calculating the Fatigue Life under Alternating Loading
Savkin A., Sunder R., Andronik A., Sedov A.
PDF
(Eng)
卷 2019, 编号 4 (2019)
Influence of a Zinc Coating on the Mechanical Properties of a Low-Carbon Steel Microalloyed with Niobium
Terent’ev V., Prosvirnin D., Marchenkov A., Rybal’chenko O., Antonova O., Matyunin V.
PDF
(Eng)
卷 2019, 编号 10 (2019)
Causes and Mechanisms of Fracture of a Main Line Section Made of 17G1S Steel
Goritskii V., Shneiderov G., Durneva A.
PDF
(Eng)
卷 2018, 编号 13 (2018)
Practice of Application of Thermal Cycle Tests in Studying the Thermal Fatigue of Materials
Tikhomirova E., Sidokhin E.
PDF
(Eng)
卷 2016, 编号 13 (2016)
Control of the surface quality parameters of machine components during static pulsed treatment
Komkov V., Rabinskii L., Kokoreva O., Kuprikov N.
PDF
(Eng)
卷 2019, 编号 10 (2019)
Effect of a Welding Method on the Fatigue Strength and Fracture of Foam–Aluminum Sandwiches
Shapovalov O., Kodzhaspirov G., Hantelmann K., Mikhailov V.
PDF
(Eng)
卷 2018, 编号 11 (2018)
Effect of Overload on the Near-Threshold Fatigue Crack Growth Rate in a 2024-T3 Aluminum Alloy: I. Effect of the Character, the Magnitude, and the Sequence of Overload on the Fatigue Crack Growth Rate
Savkin A., Sunder R., Andronik A., Sedov A.
PDF
(Eng)
卷 2016, 编号 10 (2016)
Fatigue strength of a Ti–6Al–4V alloy produced by selective laser melting
Gerov M., Vladislavskaya E., Terent’ev V., Prosvirnin D., Kolmakov A., Antonova O.
PDF
(Eng)
卷 2019, 编号 9 (2019)
Low-Cycle Fatigue of a VZh175 Nickel Superalloy during Asymmetric Loading
Gorbovets M., Khodinev I., Belyaev M., Ryzhkov P.
PDF
(Eng)
卷 2018, 编号 4 (2018)
Behavior of an Austenitic–Martensitic VNS9-Sh Sheet TRIP Steel during Static and Cyclic Deformation
Teren’tev V., Prosvirnin D., Slizov A., Kobeleva L., Marchenkov A., Ashmarin A., Sirotinkin V.
PDF
(Eng)
卷 2019, 编号 7 (2019)
Effect of Temperature on the Low-Cycle Fatigue Characteristics of Single Crystals Made of an Ni3Al-Based Rhenium-Containing Intermetallic Alloy
Povarova K., Bazyleva O., Gorbovets M., Drozdov A., Bulakhtina M.
PDF
(Eng)
卷 2018, 编号 1 (2018)
Effect of Some Impurities on the Structure, the Phase Composition, and the Properties of Magnesium Alloys Containing Rare-Earth Elements
Volkova E., Mostyaev I.
PDF
(Eng)
卷 2019, 编号 6 (2019)
Conditions of Air Shot Hardening of VT41 Titanium Alloy Blisk Blades for an Advanced Engine
Yakovlev M., Kyaramyan K., Shirvan’yants G.
PDF
(Eng)
卷 2017, 编号 10 (2017)
Improved method for determining the stress relaxation at the crack tip
Grinevich A., Erasov V., Avtaev V.
PDF
(Eng)
1 - 18 的 18 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##