| 期 |
标题 |
文件 |
| 卷 2019, 编号 10 (2019) |
Creep of Tubes under External Pressure |
(Eng)
|
|
Vorob’ev E., Peregud M., Khokhunova T., Mileshkina O., Bekrenev S., Markelov V., Shtremel’ M.
|
| 卷 2019, 编号 10 (2019) |
Effect of a Welding Method on the Fatigue Strength and Fracture of Foam–Aluminum Sandwiches |
(Eng)
|
|
Shapovalov O., Kodzhaspirov G., Hantelmann K., Mikhailov V.
|
| 卷 2019, 编号 10 (2019) |
Failure of Pump–Compressor Pipes in Highly Aggressive Oil-Field Media |
(Eng)
|
|
Vyboishchik M., Ioffe A., Zyryanov A.
|
| 卷 2019, 编号 10 (2019) |
Development of Structural Damage and Cracking in a Landing Head during Long-Term Operation under North Conditions |
(Eng)
|
|
Goritskii V., Muravin E., Shneiderov G.
|
| 卷 2019, 编号 10 (2019) |
Application of Local Strengthening for Increasing the Strength of the Welded Joint of EP517 Steel and 36NKhTYu Alloy |
(Eng)
|
|
Terent’ev E., Marchenkov A., Goncharov A., Sliva A.
|
| 卷 2019, 编号 10 (2019) |
Effect of the Martensite Content on the Mechanical Behavior and the Acoustic Emission Characteristics of a Sheet TRIP Steel during Static Tension |
(Eng)
|
|
Teren’tev V., Roshchupkin V., Penkin A., Penkin M.
|
| 卷 2019, 编号 10 (2019) |
Effect of Alloying Elements on the Hardening of Die Steels in the Austenitic State during High-Temperature Plastic Deformation |
(Eng)
|
|
Kruglyakov A.
|
| 卷 2019, 编号 10 (2019) |
Fabrication of a High-Density Compacted Material from a Coarse-Grained Silicon Carbide Powder by Magnetic Pulsed Pressing Combined with Spark Plasma Sintering |
(Eng)
|
|
Shornikov D., Tenishev A., Kazakova V., Zholnin A.
|
| 卷 2019, 编号 10 (2019) |
Properties of Longitudinal Welded Steel Pipes for Piled Foundations Built under Cryolithic Zone Conditions |
(Eng)
|
|
Odesskii P., Vershinin Y., Alekseev A., Zvezdov A.
|
| 卷 2019, 编号 4 (2019) |
Bending Failure of “Thick” Co-Based-Alloy Amorphous Wires |
(Eng)
|
|
Molokanov V., Chueva T., Umnova N., Umnov P., Krutilin A.
|
| 卷 2019, 编号 4 (2019) |
Simulation of the Stamping of Spacing Grid Cells Made of Thin-Walled Zirconium Tubes |
(Eng)
|
|
Isaenkova M., Perlovich Y., Krymskaya O., Zhuk D., Stolbov S., Klyukova K., Ivanov A.
|
| 卷 2019, 编号 4 (2019) |
Microstructure and Mechanical Properties of the Fuel Cladding in VVER-1000 after the Thermal Tests That Model Dry Storage Conditions |
(Eng)
|
|
Kobylyansky G., Obukhov A., Mazaev A., Zvir E., Ilyin P., Markelov D.
|
| 卷 2019, 编号 4 (2019) |
Long-Term Annealing Resistance of Ferritic Chromium Steels Subjected to High-Temperature Nitriding |
(Eng)
|
|
Nikulin S., Khatkevich V., Rogachev S., Bekkaliev B., Belov V.
|
| 卷 2019, 编号 4 (2019) |
Structure and Mechanical Properties of Cold-Deformed Galvanized Rolled Sheets for Light Thin-Walled Constructions |
(Eng)
|
|
Goritskii V., Kulemin A., Silina N.
|
| 卷 2019, 编号 4 (2019) |
Influence of a Zinc Coating on the Mechanical Properties of a Low-Carbon Steel Microalloyed with Niobium |
(Eng)
|
|
Terent’ev V., Prosvirnin D., Marchenkov A., Rybal’chenko O., Antonova O., Matyunin V.
|
| 卷 2019, 编号 4 (2019) |
Strength Properties and Corrosion Resistance of Pump–Compressor Pipes Made of 15Kh5MFBCh Steel after Heat and Thermomechanical Treatment under Various Conditions |
(Eng)
|
|
Vyboishchik M., Ioffe A., Zyryanov A.
|
| 卷 2019, 编号 4 (2019) |
Comparison of the Composite Materials Intended for Damping Elements for the Infrastructure of Rail Transport and Rolling Stock |
(Eng)
|
|
Kurzina E., Kolmakov A., Aksenov Y., Kurzina A., Bogachev A., Semak A.
|
| 卷 2019, 编号 4 (2019) |
Mechanical Properties and Structure of a VNS9-Sh Steel as Functions of the Tempering Temperature |
(Eng)
|
|
Terent’ev V., Ashmarin A., Blinova E., Titov D., Blinov V., Slizov A., Seval’neva T.
|
| 卷 2018, 编号 10 (2018) |
Model for Predicting the Recrystallized Ferrite Grain Size after Annealing of Cold-Rolled Automobile Body Sheet Steels |
(Eng)
|
|
Vasilyev A., Sokolov S., Zhitelev P., Sokolov D., Kolbasnikov N., Rudskoy A.
|
| 卷 2018, 编号 10 (2018) |
Estimation of the Degree of Recrystallization upon Annealing of Cold-Rolled Automobile Body Sheet Steels Using EBSD Analysis and Hardness Measurements |
(Eng)
|
|
Vasilyev A., Rudskoy A., Glukhov P., Sokolov S., Kolbasnikov N.
|
| 卷 2018, 编号 10 (2018) |
Effect of Aging on the Nanostructuring and Strength of a D16 Aluminum Alloy |
(Eng)
|
|
Markushev M., Avtokratova E., Ilyasov R., Krymskiy S., Sitdikov O.
|
| 卷 2018, 编号 10 (2018) |
Contributions of Various Mechanisms to the Hardening of Differentially Quenched Rails during Long-Term Operation |
(Eng)
|
|
Ivanov Y., Gromov V., Yur’ev A., Glezer A., Popova N., Peregudov O., Konovalov S.
|
| 卷 2018, 编号 10 (2018) |
Effect of Alloying of Titanium Nickelide-Based Alloys with Group V Elements (Vanadium, Niobium) on Their Mechanical Properties |
(Eng)
|
|
Marchenko E., Baigonakova G., Gunther V.
|
| 卷 2018, 编号 10 (2018) |
Possibility of Application of a 1565ch Alloy in the Automotive Industry |
(Eng)
|
|
Aryshenskii E., Guk S., Galiev E., Drits A., Kavalla R.
|
| 卷 2018, 编号 4 (2018) |
Behavior of an Austenitic–Martensitic VNS9-Sh Sheet TRIP Steel during Static and Cyclic Deformation |
(Eng)
|
|
Teren’tev V., Prosvirnin D., Slizov A., Kobeleva L., Marchenkov A., Ashmarin A., Sirotinkin V.
|
| 1 - 25 的 48 信息 |
1 2 > >>
|
