Поиск

Выпуск
Название
Авторы
Том 2019, № 3 (2019)
Some Features of the Cathodic and Anodic Nickel Depassivation during DC Polarization in Sulfuric Acid Solutions
Bryukvin V., Skryleva E., Naftal’ M., Levin A., Kuznetsova O., Tsybin O., Bol’shikh A.
PDF
(Eng)
Том 2018, № 11 (2018)
Effect of the Cobalt Content and Chromium Alloying on the Structure of the Scale Formed on Structural β-NiAl + γ'-Ni3Al + γ-Ni Alloys (Ni–Al–Co System) at 1300°C
Drozdov A., Povarova K., Bazyleva O., Morozov A., Antonova A., Arginbaeva E., Bulakhtina M., Ashmarin A.
PDF
(Eng)
Том 2018, № 7 (2018)
Technology of Hydrometallurgical Processing of the Nickel–Magnesium Ores from the Aganozero Deposit
Smirnov K., Molchanova T., Anan’ev A., Krylova O.
PDF
(Eng)
Том 2017, № 9 (2017)
Structural heat-resistant β-NiAl + γ′-Ni3Al alloys of the Ni–Al–Co system: I. Solidification and structure
Povarova K., Drozdov A., Bazyleva O., Morozov A., Antonova A., Bondarenko Y., Bulakhtina M., Ashmarin A., Arginbaeva E., Alad’ev N.
PDF
(Eng)
Том 2016, № 11 (2016)
Comparative analysis of the reactivity of nickel and a Ni–Re (10 wt %) alloy during direct current polarization in sulfuric acid solutions
Bryukvin V., Skryleva E., Levchuk O., Tsybin O., Bol’shikh A., Kuznetsova O.
PDF
(Eng)
Том 2019, № 8 (2019)
Electrochemical Behavior of the Nickel/Oxide Tungsten Bronze System at Cyclic Potential Sweep
Kosov A., Semerikova O., Vakarin S., Zaykov Y.
PDF
(Eng)
Том 2019, № 3 (2019)
Development of a New Combined Process for Nickel and Cobalt Recovery from Ferriferous Laterite Ores
Sadykhov G., Zablotskaya Y., Anisonyan K., Khasanov M., Olyunina T., Goncharov K., Kop’ev D.
PDF
(Eng)
Том 2018, № 11 (2018)
Structure and Properties of the Solid-Phase Joints of a Wrought EP975 Nickel Alloy and a Single-Crystal Intermetallic VKNA-25 Alloy Formed by Pressure Welding at a Strain of 24% under the Superplasticity of the EP975 Alloy
Galieva E., Povarova K., Drozdov A., Valitov V.
PDF
(Eng)
Том 2017, № 13 (2017)
Effect of Transition Metals on the Properties of Aluminum-Lead Composite Materials
Kovtunov A., Khokhlov Y., Myamin S.
PDF
(Eng)
Том 2017, № 7 (2017)
Effect of the selective laser melting parameters on the structure–phase state of a ZhS6K-VI nickel superalloy
Lukina E., Bazaleeva K., Petrushin N., Treninkov I., Tsvetkova E.
PDF
(Eng)
Том 2016, № 8 (2016)
Effect of the intermetallic compound composition of the character of interphase interactions during aluminothermic coreduction of titanium, nickel, and molybdenum from their oxides
Krasikov S., Zhilina E., Pichkaleva O., Ponomarenko A., Vedmid’ L., Zhidovinova S., Chentsov V.
PDF
(Eng)
Том 2019, № 7 (2019)
Technological Schemes and Conditions for the Production of Rolling Rings from Hollow As-Cast Blanks
Kostyshev V., Erisov Y.
PDF
(Eng)
Том 2019, № 2 (2019)
Thermodynamic Simulation of the Manufacture of Fe–Si–Ni–Cr Alloys
Zhuchkov V., Zayakin O., Salina V.
PDF
(Eng)
Том 2018, № 1 (2018)
Formation of Gradient Structures in the Zone of Joining a Deformable Nickel Alloy and a Single-Crystal Intermetallic Alloy during Thermodiffusion Pressure Welding and Subsequent Heat Treatment
Povarova K., Valitov V., Drozdov A., Bazyleva O., Galieva E., Arginbaeva E.
PDF
(Eng)
Том 2017, № 13 (2017)
Methods of Enhancing the Operating Characteristics of Gas-Turbine Blades
Ospennikova O., Visik E., Gerasimov V., Kolyadov E.
PDF
(Eng)
Том 2017, № 7 (2017)
Structural features and properties of the laser-deposited nickel alloy layer on a KhV4F tool steel after heat treatment
Shcherbakov V., Dikova T., Stavrev D.
PDF
(Eng)
Том 2016, № 8 (2016)
Stages of synthesis of solid solutions during the mechanochemical formation of liquid–solid metal pairs
Grigor’eva T., Devyatkina E., Tsybulya S., Pastukhov E., Lyakhov N.
PDF
(Eng)
Том 2019, № 13 (2019)
Key Differences between the Technology of Production of GTE Disk Blanks from Nickel Superalloy Granules and the Technology of Isothermal Deformation: A Review
Volkov A., Karashaev M., Letnikov M., Bakradze M.
PDF
(Eng)
Том 2019, № 7 (2019)
Effect of Temperature on the Low-Cycle Fatigue Characteristics of Single Crystals Made of an Ni3Al-Based Rhenium-Containing Intermetallic Alloy
Povarova K., Bazyleva O., Gorbovets M., Drozdov A., Bulakhtina M.
PDF
(Eng)
Том 2019, № 1 (2019)
Some Features of the Nickel Passivation Mechanism during Direct Current Polarization in Sulfuric Acid Solutions
Bryukvin V., Skryleva E., Levin A., Kuznetsova O., Naftal’ M., Bol’shikh A.
PDF
(Eng)
Том 2018, № 9 (2018)
Thermodynamics of the Oxygen Solutions in the Titanium-Containing Ni–Cr Melts
Aleksandrov A., Dashevskii V.
PDF
(Eng)
Том 2017, № 12 (2017)
Homogenization Processes in Single-Crystal and Granular ZhS32-VI High-Temperature Alloys
Orlov M., Petrushin N., Evgenov A., Karachevtsev F.
PDF
(Eng)
Том 2017, № 6 (2017)
Experimental-calculation study of ion-plasma thermal barrier coatings for turbine blades made of intermetallic nickel superalloys
Budinovskii S., Matveev P., Zhivushkin A., Tikhomirova E., Belyaeva L., Balakin S.
PDF
(Eng)
26 - 48 из 48 результатов << < 1 2 
Подсказки:
  • Ключевые слова чувствительны к регистру
  • Английские предлоги и союзы игнорируются
  • По умолчанию поиск проводится по всем ключевым словам (агенс AND экспериенцер)
  • Используйте OR для поиска того или иного термина, напр. образование OR обучение
  • Используйте скобки для создания сложных фраз, напр. архив ((журналов OR конференций) NOT диссертаций)
  • Для поиска точной фразы используйте кавычки, напр. "научные исследования"
  • Исключайте слово при помощи знака - (дефис) или оператора NOT; напр. конкурс -красоты или же конкурс NOT красоты
  • Используйте * в качестве версификатора, напр. научн* охватит слова "научный", "научные" и т.д.

Данный сайт использует cookie-файлы

Продолжая использовать наш сайт, вы даете согласие на обработку файлов cookie, которые обеспечивают правильную работу сайта.

О куки-файлах