Pesquisa

Edição
Título
Autores
Volume 2019, Nº 3 (2019)
Some Features of the Cathodic and Anodic Nickel Depassivation during DC Polarization in Sulfuric Acid Solutions
Bryukvin V., Skryleva E., Naftal’ M., Levin A., Kuznetsova O., Tsybin O., Bol’shikh A.
PDF
(Eng)
Volume 2018, Nº 11 (2018)
Effect of the Cobalt Content and Chromium Alloying on the Structure of the Scale Formed on Structural β-NiAl + γ'-Ni3Al + γ-Ni Alloys (Ni–Al–Co System) at 1300°C
Drozdov A., Povarova K., Bazyleva O., Morozov A., Antonova A., Arginbaeva E., Bulakhtina M., Ashmarin A.
PDF
(Eng)
Volume 2018, Nº 7 (2018)
Technology of Hydrometallurgical Processing of the Nickel–Magnesium Ores from the Aganozero Deposit
Smirnov K., Molchanova T., Anan’ev A., Krylova O.
PDF
(Eng)
Volume 2017, Nº 9 (2017)
Structural heat-resistant β-NiAl + γ′-Ni3Al alloys of the Ni–Al–Co system: I. Solidification and structure
Povarova K., Drozdov A., Bazyleva O., Morozov A., Antonova A., Bondarenko Y., Bulakhtina M., Ashmarin A., Arginbaeva E., Alad’ev N.
PDF
(Eng)
Volume 2016, Nº 11 (2016)
Comparative analysis of the reactivity of nickel and a Ni–Re (10 wt %) alloy during direct current polarization in sulfuric acid solutions
Bryukvin V., Skryleva E., Levchuk O., Tsybin O., Bol’shikh A., Kuznetsova O.
PDF
(Eng)
Volume 2019, Nº 8 (2019)
Electrochemical Behavior of the Nickel/Oxide Tungsten Bronze System at Cyclic Potential Sweep
Kosov A., Semerikova O., Vakarin S., Zaykov Y.
PDF
(Eng)
Volume 2019, Nº 3 (2019)
Development of a New Combined Process for Nickel and Cobalt Recovery from Ferriferous Laterite Ores
Sadykhov G., Zablotskaya Y., Anisonyan K., Khasanov M., Olyunina T., Goncharov K., Kop’ev D.
PDF
(Eng)
Volume 2018, Nº 11 (2018)
Structure and Properties of the Solid-Phase Joints of a Wrought EP975 Nickel Alloy and a Single-Crystal Intermetallic VKNA-25 Alloy Formed by Pressure Welding at a Strain of 24% under the Superplasticity of the EP975 Alloy
Galieva E., Povarova K., Drozdov A., Valitov V.
PDF
(Eng)
Volume 2017, Nº 13 (2017)
Effect of Transition Metals on the Properties of Aluminum-Lead Composite Materials
Kovtunov A., Khokhlov Y., Myamin S.
PDF
(Eng)
Volume 2017, Nº 7 (2017)
Effect of the selective laser melting parameters on the structure–phase state of a ZhS6K-VI nickel superalloy
Lukina E., Bazaleeva K., Petrushin N., Treninkov I., Tsvetkova E.
PDF
(Eng)
Volume 2016, Nº 8 (2016)
Effect of the intermetallic compound composition of the character of interphase interactions during aluminothermic coreduction of titanium, nickel, and molybdenum from their oxides
Krasikov S., Zhilina E., Pichkaleva O., Ponomarenko A., Vedmid’ L., Zhidovinova S., Chentsov V.
PDF
(Eng)
Volume 2019, Nº 7 (2019)
Technological Schemes and Conditions for the Production of Rolling Rings from Hollow As-Cast Blanks
Kostyshev V., Erisov Y.
PDF
(Eng)
Volume 2019, Nº 2 (2019)
Thermodynamic Simulation of the Manufacture of Fe–Si–Ni–Cr Alloys
Zhuchkov V., Zayakin O., Salina V.
PDF
(Eng)
Volume 2018, Nº 1 (2018)
Formation of Gradient Structures in the Zone of Joining a Deformable Nickel Alloy and a Single-Crystal Intermetallic Alloy during Thermodiffusion Pressure Welding and Subsequent Heat Treatment
Povarova K., Valitov V., Drozdov A., Bazyleva O., Galieva E., Arginbaeva E.
PDF
(Eng)
Volume 2017, Nº 13 (2017)
Methods of Enhancing the Operating Characteristics of Gas-Turbine Blades
Ospennikova O., Visik E., Gerasimov V., Kolyadov E.
PDF
(Eng)
Volume 2017, Nº 7 (2017)
Structural features and properties of the laser-deposited nickel alloy layer on a KhV4F tool steel after heat treatment
Shcherbakov V., Dikova T., Stavrev D.
PDF
(Eng)
Volume 2016, Nº 8 (2016)
Stages of synthesis of solid solutions during the mechanochemical formation of liquid–solid metal pairs
Grigor’eva T., Devyatkina E., Tsybulya S., Pastukhov E., Lyakhov N.
PDF
(Eng)
Volume 2019, Nº 13 (2019)
Key Differences between the Technology of Production of GTE Disk Blanks from Nickel Superalloy Granules and the Technology of Isothermal Deformation: A Review
Volkov A., Karashaev M., Letnikov M., Bakradze M.
PDF
(Eng)
Volume 2019, Nº 7 (2019)
Effect of Temperature on the Low-Cycle Fatigue Characteristics of Single Crystals Made of an Ni3Al-Based Rhenium-Containing Intermetallic Alloy
Povarova K., Bazyleva O., Gorbovets M., Drozdov A., Bulakhtina M.
PDF
(Eng)
Volume 2019, Nº 1 (2019)
Some Features of the Nickel Passivation Mechanism during Direct Current Polarization in Sulfuric Acid Solutions
Bryukvin V., Skryleva E., Levin A., Kuznetsova O., Naftal’ M., Bol’shikh A.
PDF
(Eng)
Volume 2018, Nº 9 (2018)
Thermodynamics of the Oxygen Solutions in the Titanium-Containing Ni–Cr Melts
Aleksandrov A., Dashevskii V.
PDF
(Eng)
Volume 2017, Nº 12 (2017)
Homogenization Processes in Single-Crystal and Granular ZhS32-VI High-Temperature Alloys
Orlov M., Petrushin N., Evgenov A., Karachevtsev F.
PDF
(Eng)
Volume 2017, Nº 6 (2017)
Experimental-calculation study of ion-plasma thermal barrier coatings for turbine blades made of intermetallic nickel superalloys
Budinovskii S., Matveev P., Zhivushkin A., Tikhomirova E., Belyaeva L., Balakin S.
PDF
(Eng)
26 - 48 de 48 resultados << < 1 2 
Dicas:
  • Palavras-chave são sensíveis a maiúsculas
  • Preposições e conjunções ingleses são ignoradas
  • Busca é feita por todos os palavras-chave (agente AND experimentador) por omissão
  • Use OR para pesquisar um termo exato, ex.: educação OR formação
  • Use parênteses para criar frases complexas, ex.: arquivo de ((revistas OR conferências) NOT teses)
  • Para pesquisar uma frase precisa use aspas duplas, ex.: "investigações científicas"
  • Exclua uma palavra utilizando o sinal - (hífen) ou operador NOT; ex.: concurso-de beleza ou concurso NOT de beleza
  • Use * como caractere-coringa, ex.: científic* recuperará as palavras "científico", "científicos", etc.

Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies