Pesquisa

Edição
Título
Autores
Structure and Properties of Alloy Ti–6Al–4V Samples Fabricated by 3D Printing
Skvortsova S., German M., Spektor V.
Hardening of Silumins by Aerothermoacoustic Treatment
Remshev E., Danilin G., Titov A., Vorob’eva G., Kalugina M.
Influence of aerothermoacoustic treatment on the structure and the properties of a TS6 titanium alloy
Remshev E., Danilin G., Vorob’eva G., Kuznetsov V.
Strength Properties and Corrosion Resistance of Pump–Compressor Pipes Made of 15Kh5MFBCh Steel after Heat and Thermomechanical Treatment under Various Conditions
Vyboishchik M., Ioffe A., Zyryanov A.
Technology of Plastic Deformation Repair of Metallurgical Machine Parts
Skhirtladze A., Skryabin V.
Formation of the Properties of the Working Surfaces of Important Parts by Plasma Surfacing and Surface Heat Treatment by a Reversed-Polarity Current
Shchitsyn V., Gaidar S., Shchitsyn Y., Kastell E.
Heat-insulating aerogel composites for a hydrothermal reactor
Vedenin A., Vityaz’ P., Galinovskii A., Ivanova I., Mazalov Y., Pustovgar A., Sudnik L.
Simulation of the Heat Treatment of the Welded Joints in a High-Pressure Compressor
Kyaramyan K., Lomberg B., Bakradze M., Isaev D., Bykov Y., Mazalov I.
Homogenization Processes in Single-Crystal and Granular ZhS32-VI High-Temperature Alloys
Orlov M., Petrushin N., Evgenov A., Karachevtsev F.
Application of Indentation for Estimating the Thermal Stability of Plasma Thermal Barrier Coatings
Il’inkova T., Barsukova E.
Properties of Longitudinal Welded Steel Pipes for Piled Foundations Built under Cryolithic Zone Conditions
Odesskii P., Vershinin Y., Alekseev A., Zvezdov A.
Effect of the Initial State of a Steel 38KhN3MFA Billet on the Microstructure and the Mechanical Properties of Seamless Pipes
Vorob’ev R., Dubinskii V., Sorokina S.
Application of Local Strengthening for Increasing the Strength of the Welded Joint of EP517 Steel and 36NKhTYu Alloy
Terent’ev E., Marchenkov A., Goncharov A., Sliva A.
Properties of a 49Ni–36Ti–15Hf High-Temperature Shape Memory Alloy in the As-Cast State
Popov N., Presnyakov D., Grishin E., Sysoeva T., Morozova T., Kostyleva A.
Heat Treatment of Tantalum and Niobium Powders Prepared by Magnesium-Thermic Reduction
Orlov V., Prokhorova T.
Effect of Annealing on the Structure and the Hardness of Die Steel with a Controllable Austenitic Transformation during Operation
Kruglyakov A., Nikulin S., Rogachev S., Lebedeva N., Panova G., Nguen H., Serikov E.
Creep of a Titanium Nickelide-Based Alloy during Torsional Deformation
Gusev D., Kollerov M., Sharonov A., Vinogradov R.
Thermomechanical Behavior of Titanium Nickelide-Based Alloys at a Constant Counteraction
Kollerov M., Gusev D., Gurtovoi S., Burnaev A.
Influence of heat treatment on the efficiency of impact fragmentation of amorphous alloy Fe73.5Cu1Nb3Si13.5B9 ribbons
Kuznetsov P., Samodelkin E., Klimov V., Kashirina A.
1 - 19 de 19 resultados
Dicas:
  • Palavras-chave são sensíveis a maiúsculas
  • Preposições e conjunções ingleses são ignoradas
  • Busca é feita por todos os palavras-chave (agente AND experimentador) por omissão
  • Use OR para pesquisar um termo exato, ex.: educação OR formação
  • Use parênteses para criar frases complexas, ex.: arquivo de ((revistas OR conferências) NOT teses)
  • Para pesquisar uma frase precisa use aspas duplas, ex.: "investigações científicas"
  • Exclua uma palavra utilizando o sinal - (hífen) ou operador NOT; ex.: concurso-de beleza ou concurso NOT de beleza
  • Use * como caractere-coringa, ex.: científic* recuperará as palavras "científico", "científicos", etc.

Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies