Email this article Technology of Plastic Deformation Repair of Metallurgical Machine Parts
- Authors: Skhirtladze A.G.1, Skryabin V.A.2
-
Affiliations:
- Moscow State Technological University Stankin
- Penza State University
- Issue: Vol 2018, No 13 (2018)
- Pages: 1301-1305
- Section: Repair and Modification of Equipment
- URL: https://journals.rcsi.science/0036-0295/article/view/172847
- DOI: https://doi.org/10.1134/S0036029518130219
- ID: 172847
Cite item
Open Access
Access granted
Subscription Access
Abstract
The technologies of repairing the worn parts of metallurgical equipment using plastic deformation methods, namely, expansion, swaging, upsetting, pressing, knurling, and forge-rolling, are described. Recommendations are given to choose temperature conditions in repairing the parts and determining the deformation forces.
Keywords
operation, machine, part, wear, restoration, repairing, heat treatment, heating, temperature, deformation, steel, carbon, alloying element, expansion, swaging, upsetting, pressing, knurling, forge-rolling, die, gear, bush, size, resistance, pressure, stress, metal, neck, shaft, pin
About the authors
A. G. Skhirtladze
Moscow State Technological University Stankin
Email: vs_51@list.ru
Russian Federation, Moscow
V. A. Skryabin
Penza State University
Author for correspondence.
Email: vs_51@list.ru
Russian Federation, Penza
