Russian Metallurgy (Metally)
ISSN 0036-0295 (Print)
ISSN 1555-6255 (Online)
Menu
Arquivos
Página principal
Sobre a Revista
Equipe Editorial
Política Editorial
Diretrizes para Autores
Sobre a Revista
Edições
Pesquisa
Edição corrente
Arquivos
Contatos
Todas as revistas
Usuário
Nome de usuário
Senha
Lembrar usuário
Esqueceu a senha?
Cadastro
Notificações
Ver
Assinar
Conteúdo da revista
Pesquisa
Escopo da Busca
Todos
Autores
Título
Resumo
Termos
Texto integral
Navegar
Edições
Autores
por título
por Seção
Outras Revistas
Assinatura
Entrar no sistema para verificar sua assinatura
Palavras-chave
aluminum
aluminum alloys
composite material
deformation
diffusion
hardness
heat treatment
impact toughness
mechanical properties
melt
melts
microhardness
microstructure
nickel
oxidation
phase composition
rare-earth metals
steel
strength
structure
titanium
Informações
Para leitores
Para Autores
Para Bibliotecários
×
Usuário
Nome de usuário
Senha
Lembrar usuário
Esqueceu a senha?
Cadastro
Notificações
Ver
Assinar
Conteúdo da revista
Pesquisa
Escopo da Busca
Todos
Autores
Título
Resumo
Termos
Texto integral
Navegar
Edições
Autores
por título
por Seção
Outras Revistas
Assinatura
Entrar no sistema para verificar sua assinatura
Palavras-chave
aluminum
aluminum alloys
composite material
deformation
diffusion
hardness
heat treatment
impact toughness
mechanical properties
melt
melts
microhardness
microstructure
nickel
oxidation
phase composition
rare-earth metals
steel
strength
structure
titanium
Informações
Para leitores
Para Autores
Para Bibliotecários
Página principal
>
Pesquisa
>
Informaçao sobre o Autor
Informaçao sobre o Autor
Kolmakov, A. G.
Edição
Seção
Título
Arquivo
Volume 2016, Nº 4 (2016)
Applied Problems of Strength and Plasticity
Fatigue strength of low-activation ferritic–martensitic high-chromium EK-181 steel
Volume 2016, Nº 10 (2016)
Promising Materials and Technologies
Fatigue strength of a Ti–6Al–4V alloy produced by selective laser melting
Volume 2018, Nº 1 (2018)
Article
Structure and Tribological Properties of B83 Babbit–Based Composite Rods and the Coatings Produced from Them by Arc Surfacing
Volume 2018, Nº 4 (2018)
Structure and Properties of the Deformed State
Friction Surfaces and Wear Products of Sn–Sb–Cu-Based Composite Materials
Volume 2018, Nº 4 (2018)
Applied Problems of Strength and Plasticity
Estimation of the Delayed Hydride Cracking Resistance of the Pressure Tubes in Nuclear Reactors
Volume 2019, Nº 1 (2019)
Article
Effect of Alloying Elements on the Wetting of Graphitized Carbon with Copper Alloys
Volume 2019, Nº 4 (2019)
Advanced Materials and Technologies
Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting
Volume 2019, Nº 4 (2019)
Applied Problems of Strength and Plasticity
Comparison of the Composite Materials Intended for Damping Elements for the Infrastructure of Rail Transport and Rolling Stock
Volume 2019, Nº 10 (2019)
Diagnostics and Mechanical Test Techniques
Elastic Hysteretic Properties of Damping Composite Materials for Rail Transport at Low Temperatures under Static and Dynamic Loading
Este site utiliza cookies
Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.
Informação sobre cookies
TOP