Friction Surfaces and Wear Products of Sn–Sb–Cu-Based Composite Materials
- Autores: Kalashnikov I.1, Kobeleva L.1, Bolotova L.1, Bykov P.1, Kolmakov A.1
-
Afiliações:
- Baikov Institute of Metallurgy and Materials Science
- Edição: Volume 2018, Nº 4 (2018)
- Páginas: 377-382
- Seção: Structure and Properties of the Deformed State
- URL: https://journals.rcsi.science/0036-0295/article/view/172488
- DOI: https://doi.org/10.1134/S0036029518040043
- ID: 172488
Citar
Resumo
The structure and the tribological properties of the composite materials based on an Sn–Sb–Cu alloy (B83 babbit) and fabricated by hot pressing of powders are studied under dry sliding friction conditions. Modified schungite and silicon carbide are chosen as reinforcing materials. The composite material fabricated by a powder technology and reinforced by silicon carbide and modified schungite particles is found to have the doubled wear resistance as compared to a cast B83 alloy at a comparable friction coefficient.
Sobre autores
I. Kalashnikov
Baikov Institute of Metallurgy and Materials Science
Autor responsável pela correspondência
Email: kalash2605@mail.ru
Rússia, Leninskii pr. 49, Moscow, 119991
L. Kobeleva
Baikov Institute of Metallurgy and Materials Science
Email: kalash2605@mail.ru
Rússia, Leninskii pr. 49, Moscow, 119991
L. Bolotova
Baikov Institute of Metallurgy and Materials Science
Email: kalash2605@mail.ru
Rússia, Leninskii pr. 49, Moscow, 119991
P. Bykov
Baikov Institute of Metallurgy and Materials Science
Email: kalash2605@mail.ru
Rússia, Leninskii pr. 49, Moscow, 119991
A. Kolmakov
Baikov Institute of Metallurgy and Materials Science
Email: kalash2605@mail.ru
Rússia, Leninskii pr. 49, Moscow, 119991
![](/img/style/loading.gif)