Friction Surfaces and Wear Products of Sn–Sb–Cu-Based Composite Materials
- 作者: Kalashnikov I.1, Kobeleva L.1, Bolotova L.1, Bykov P.1, Kolmakov A.1
-
隶属关系:
- Baikov Institute of Metallurgy and Materials Science
- 期: 卷 2018, 编号 4 (2018)
- 页面: 377-382
- 栏目: Structure and Properties of the Deformed State
- URL: https://journals.rcsi.science/0036-0295/article/view/172488
- DOI: https://doi.org/10.1134/S0036029518040043
- ID: 172488
如何引用文章
详细
The structure and the tribological properties of the composite materials based on an Sn–Sb–Cu alloy (B83 babbit) and fabricated by hot pressing of powders are studied under dry sliding friction conditions. Modified schungite and silicon carbide are chosen as reinforcing materials. The composite material fabricated by a powder technology and reinforced by silicon carbide and modified schungite particles is found to have the doubled wear resistance as compared to a cast B83 alloy at a comparable friction coefficient.
作者简介
I. Kalashnikov
Baikov Institute of Metallurgy and Materials Science
编辑信件的主要联系方式.
Email: kalash2605@mail.ru
俄罗斯联邦, Leninskii pr. 49, Moscow, 119991
L. Kobeleva
Baikov Institute of Metallurgy and Materials Science
Email: kalash2605@mail.ru
俄罗斯联邦, Leninskii pr. 49, Moscow, 119991
L. Bolotova
Baikov Institute of Metallurgy and Materials Science
Email: kalash2605@mail.ru
俄罗斯联邦, Leninskii pr. 49, Moscow, 119991
P. Bykov
Baikov Institute of Metallurgy and Materials Science
Email: kalash2605@mail.ru
俄罗斯联邦, Leninskii pr. 49, Moscow, 119991
A. Kolmakov
Baikov Institute of Metallurgy and Materials Science
Email: kalash2605@mail.ru
俄罗斯联邦, Leninskii pr. 49, Moscow, 119991