Issue |
Title |
File |
Vol 2017, No 1 (2017) |
Ordering–separation phase transitions in a Co3V alloy |
(Eng)
|
Ustinovshchikov Y.I.
|
Vol 2017, No 1 (2017) |
Technological and strength properties of silumin modified by silicon dioxide nanoparticles |
(Eng)
|
Radnaev A.R., Kalashnikov S.V., Nomoev A.V., Dzidziguri E.L.
|
Vol 2017, No 1 (2017) |
Influence of aerothermoacoustic treatment on the structure and the properties of a TS6 titanium alloy |
(Eng)
|
Remshev E.Y., Danilin G.A., Vorob’eva G.A., Kuznetsov V.V.
|
Vol 2017, No 1 (2017) |
Increasing the reliability and quality of important cast products made of chemically active metals and alloys |
(Eng)
|
Varfolomeev M.S., Moiseev V.S., Shcherbakova G.I.
|
Vol 2017, No 1 (2017) |
Electrochemical recovery of rhenium from W–Re alloys in the form of perrhenic acid: I. Fundamentals of the process |
(Eng)
|
Levin A.M., Levchuk O.M.
|
Vol 2016, No 11 (2016) |
Properties of shaped castings made of modern cast VML18 and VML20 magnesium alloys manufactured by new methods |
(Eng)
|
Leonov A.A., Duyunova V.A., Uridiya Z.P., Trofimov N.V.
|
Vol 2016, No 11 (2016) |
Removal of impurities from zirconium tetrafluoride using metallic zirconium chips |
(Eng)
|
Rusakov I.Y., Buinovskii A.S., Sofronov V.L.
|
Vol 2016, No 11 (2016) |
Plastic deformation of the plastic matrix–hard inclusion composite system during high-temperature gas extrusion |
(Eng)
|
Berbentsev V.D., Bugakov V.I., Vaganov V.E., Alymov M.I., Aborkin A.V.
|
Vol 2016, No 11 (2016) |
Some physicochemical properties of aluminum and iron chloride solutions |
(Eng)
|
Balmaev B.G., Tuzhilin A.S., Shebalkova A.Y., Rozhkov D.Y.
|
Vol 2016, No 11 (2016) |
Role of a silicate phase in the reduction of iron and chromium and their oxidation with carbide formation during the manufacture of carbon ferrochrome |
(Eng)
|
Roshchin V.E., Roshchin A.V., Akhmetov K.T., Salikhov S.P.
|
Vol 2016, No 11 (2016) |
Phase transitions in zirconium–palladium alloys |
(Eng)
|
Zaginaichenko S.Y., Matysina Z.A., Shchur D.V., Polishchuk M.A., Gabdullin M.T.
|
Vol 2016, No 11 (2016) |
Technique and results of simulating energy efficient tension conditions for a reversing cold rolling mill |
(Eng)
|
Garber E.A., Aleshin A.E., Degtev S.S., Traino A.I.
|
Vol 2016, No 11 (2016) |
Combined use of the leucoxene ores of the Yarega deposit with the formation of synthetic rutile and wollastonite and the recovery of rare and rare-earth elements |
(Eng)
|
Olyunina T.V., Sadykhov G.B., Zablotskaya Y.V., Anisonyan K.G.
|
Vol 2016, No 11 (2016) |
Improvement of the technique of calculating the energy–force parameters of pinch-pass mills for increasing the efficiency of producing cold-rolled strips |
(Eng)
|
Garber E.A., Timofeeva M.A.
|
Vol 2016, No 11 (2016) |
Structure formation in grade 20 steel during equal-channel angular pressing and subsequent heating |
(Eng)
|
Dobatkin S.V., Odesskii P.D., Raab G.I., Tyutin M.R., Rybalchenko O.V.
|
Vol 2016, No 11 (2016) |
Effect of the liquid phase on the formation of orthorhombic boride during the crystallization of Fe82B18 amorphous ribbons |
(Eng)
|
Suslov A.A., Lad’yanov V.I.
|
Vol 2016, No 11 (2016) |
Application of high-temperature extraction in a carrier gas for a quantitative determination of TiN in rail steel |
(Eng)
|
Tabakov Y.I., Grigorovich K.V., Rumyantsev B.A.
|
Vol 2016, No 11 (2016) |
Improvement of the linear polarization resistance method for testing steel corrosion inhibitors |
(Eng)
|
Faritov A.T., Rozhdestvenskii Y.G., Yamshchikova S.A., Minnikhanova E.R., Tyusenkov A.S.
|
Vol 2016, No 11 (2016) |
Interaction of exogenous zirconium oxide nanophases with sulfur and tin in nickel melts |
(Eng)
|
Anuchkin S.N., Burtsev V.T., Samokhin A.V.
|
Vol 2016, No 11 (2016) |
Comparative analysis of the reactivity of nickel and a Ni–Re (10 wt %) alloy during direct current polarization in sulfuric acid solutions |
(Eng)
|
Bryukvin V.A., Skryleva E.A., Levchuk O.M., Tsybin O.I., Bol’shikh A.O., Kuznetsova O.G.
|
Vol 2016, No 11 (2016) |
Properties of a 45Ti–45Ni–10Nb shape memory alloy in the as-cast and pressed states |
(Eng)
|
Popov N.N., Sysoeva T.I., Aushev A.A., Lar’kin V.F., Kostyleva A.A.
|
Vol 2016, No 11 (2016) |
Structure of electroexplosive TiC–Ni composite coatings on steel after electron-beam treatment |
(Eng)
|
Romanov D.A., Goncharova E.N., Budovskikh E.A., Gromov V.E., Ivanov Y.F., Teresov A.D., Kazimirov S.A.
|
Vol 2016, No 9 (2016) |
Influence of preliminary deformation on the hardening effect upon aging of Al–Cu–Li alloys |
(Eng)
|
Betsofen S.Y., Ashmarin A.A., Knyazev M.I., Dolgova M.I.
|
Vol 2016, No 9 (2016) |
Microstructure and properties of the eutectic 12Si–Al alloy subjected to barothermal treatment |
(Eng)
|
Dedyaeva E.V., Nikiforov P.N., Padalko A.G., Talanova G.V., Shvorneva L.I.
|
Vol 2016, No 9 (2016) |
Thermodynamic simulation and an experimental study of the possibility of synthesizing hardened Cu–Zr–O alloys |
(Eng)
|
Samoilova O.V., Mikhailov G.G., Trofimov E.A., Makrovets L.A.
|
326 - 350 of 453 Items |
<< < 9 10 11 12 13 14 15 16 17 18 > >>
|