Шығарылым |
Атауы |
Файл |
Том 2017, № 1 (2017) |
Palladium–lead alloys for the purification of hydrogen-containing gas mixtures and the separation of hydrogen from them |
(Eng)
|
Gorbunov S., Kannykin S., Penkina T., Roshan N., Chustov E., Burkhanov G.
|
Том 2017, № 1 (2017) |
Technique for simulating high-cycle rolling to produce metallic materials reinforced by particles |
(Eng)
|
Galkin V., Evseev P., Paltievich A.
|
Том 2017, № 1 (2017) |
Synthesis of cast graphite-containing Cu–Cr–C composites |
(Eng)
|
Bodrova L., Pastukhov E., Goida E., Ovchinnikova L.
|
Том 2017, № 1 (2017) |
Corrosion-resistant coating for GTE compressor parts made of steels with low tempering temperatures |
(Eng)
|
Muboyadzhyan S., Egorova L., Gorlov D., Bulavintseva E.
|
Том 2017, № 1 (2017) |
On interrelation of damage accumulation in structural steels and physical parameters estimated by methods of acoustic emission and metal magnetic memory |
(Eng)
|
Botvina L., Soldatenkov A., Tyutin M., Demina Y., Levin V., Petersen T.
|
Том 2016, № 11 (2016) |
Application of high-temperature extraction in a carrier gas for a quantitative determination of TiN in rail steel |
(Eng)
|
Tabakov Y., Grigorovich K., Rumyantsev B.
|
Том 2016, № 11 (2016) |
Improvement of the linear polarization resistance method for testing steel corrosion inhibitors |
(Eng)
|
Faritov A., Rozhdestvenskii Y., Yamshchikova S., Minnikhanova E., Tyusenkov A.
|
Том 2016, № 11 (2016) |
Interaction of exogenous zirconium oxide nanophases with sulfur and tin in nickel melts |
(Eng)
|
Anuchkin S., Burtsev V., Samokhin A.
|
Том 2016, № 11 (2016) |
Comparative analysis of the reactivity of nickel and a Ni–Re (10 wt %) alloy during direct current polarization in sulfuric acid solutions |
(Eng)
|
Bryukvin V., Skryleva E., Levchuk O., Tsybin O., Bol’shikh A., Kuznetsova O.
|
Том 2016, № 11 (2016) |
Properties of a 45Ti–45Ni–10Nb shape memory alloy in the as-cast and pressed states |
(Eng)
|
Popov N., Sysoeva T., Aushev A., Lar’kin V., Kostyleva A.
|
Том 2016, № 11 (2016) |
Structure of electroexplosive TiC–Ni composite coatings on steel after electron-beam treatment |
(Eng)
|
Romanov D., Goncharova E., Budovskikh E., Gromov V., Ivanov Y., Teresov A., Kazimirov S.
|
Том 2016, № 11 (2016) |
Properties of shaped castings made of modern cast VML18 and VML20 magnesium alloys manufactured by new methods |
(Eng)
|
Leonov A., Duyunova V., Uridiya Z., Trofimov N.
|
Том 2016, № 11 (2016) |
Removal of impurities from zirconium tetrafluoride using metallic zirconium chips |
(Eng)
|
Rusakov I., Buinovskii A., Sofronov V.
|
Том 2016, № 11 (2016) |
Plastic deformation of the plastic matrix–hard inclusion composite system during high-temperature gas extrusion |
(Eng)
|
Berbentsev V., Bugakov V., Vaganov V., Alymov M., Aborkin A.
|
Том 2016, № 11 (2016) |
Some physicochemical properties of aluminum and iron chloride solutions |
(Eng)
|
Balmaev B., Tuzhilin A., Shebalkova A., Rozhkov D.
|
Том 2016, № 11 (2016) |
Role of a silicate phase in the reduction of iron and chromium and their oxidation with carbide formation during the manufacture of carbon ferrochrome |
(Eng)
|
Roshchin V., Roshchin A., Akhmetov K., Salikhov S.
|
Том 2016, № 11 (2016) |
Phase transitions in zirconium–palladium alloys |
(Eng)
|
Zaginaichenko S., Matysina Z., Shchur D., Polishchuk M., Gabdullin M.
|
Том 2016, № 11 (2016) |
Technique and results of simulating energy efficient tension conditions for a reversing cold rolling mill |
(Eng)
|
Garber E., Aleshin A., Degtev S., Traino A.
|
Том 2016, № 11 (2016) |
Combined use of the leucoxene ores of the Yarega deposit with the formation of synthetic rutile and wollastonite and the recovery of rare and rare-earth elements |
(Eng)
|
Olyunina T., Sadykhov G., Zablotskaya Y., Anisonyan K.
|
Том 2016, № 11 (2016) |
Improvement of the technique of calculating the energy–force parameters of pinch-pass mills for increasing the efficiency of producing cold-rolled strips |
(Eng)
|
Garber E., Timofeeva M.
|
Том 2016, № 11 (2016) |
Structure formation in grade 20 steel during equal-channel angular pressing and subsequent heating |
(Eng)
|
Dobatkin S., Odesskii P., Raab G., Tyutin M., Rybalchenko O.
|
Том 2016, № 11 (2016) |
Effect of the liquid phase on the formation of orthorhombic boride during the crystallization of Fe82B18 amorphous ribbons |
(Eng)
|
Suslov A., Lad’yanov V.
|
Том 2016, № 9 (2016) |
Advanced reactor vessel steels for reactors with supercritical coolant parameters |
(Eng)
|
Markov S., Dub V., Lebedev A., Kuleshova E., Balikoev A., Makarycheva E., Tolstykh D., Frolov A., Krikun E.
|
Том 2016, № 9 (2016) |
Recrystallization kinetics of an austenitic high-manganese steel subjected to severe plastic deformation |
(Eng)
|
Yanushkevich Z., Molodov D., Belyakov A., Kaibyshev R.
|
Том 2016, № 9 (2016) |
Effect of the nanocrystallization of a soft magnetic amorphous Fe–P–Mo alloy on its corrosion resistance in a damp industrial SO2-contaminated atmosphere |
(Eng)
|
Vavilova V., Korneev V., Anosova M.
|
Нәтижелер 453 - 326/350 |
<< < 9 10 11 12 13 14 15 16 17 18 > >>
|