Enviar artigo por via de e-mail Technological and strength properties of silumin modified by silicon dioxide nanoparticles
- Autores: Radnaev A.1, Kalashnikov S.1, Nomoev A.1, Dzidziguri E.2
-
Afiliações:
- Buryat State University
- National University of Science and Technology MISiS
- Edição: Volume 2017, Nº 1 (2017)
- Páginas: 31-35
- Seção: Article
- URL: https://journals.rcsi.science/0036-0295/article/view/171206
- DOI: https://doi.org/10.1134/S0036029517010098
- ID: 171206
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The eutectic silumin modified by SiO2 nanoparticles is fabricated and studied. The sizes of particles and their concentration in the melt are varied. The strength of the silumin is found to complexly depend on the SiO2 nanopowder particle size. The noticeable increase in the hardness during heat treatment of the nanomodified silumin is mainly related to Guinier–Preston zones, and the contribution of grain refinement (precipitation hardening) is insignificant.
Palavras-chave
Sobre autores
A. Radnaev
Buryat State University
Autor responsável pela correspondência
Email: radnaev.1961@mail.ru
Rússia, ul. Ranzhurov 6a, Ulan-Ude, 670000
S. Kalashnikov
Buryat State University
Email: radnaev.1961@mail.ru
Rússia, ul. Ranzhurov 6a, Ulan-Ude, 670000
A. Nomoev
Buryat State University
Email: radnaev.1961@mail.ru
Rússia, ul. Ranzhurov 6a, Ulan-Ude, 670000
E. Dzidziguri
National University of Science and Technology MISiS
Email: radnaev.1961@mail.ru
Rússia, Leninskii pr. 4, Moscow, 119049
