Issue |
Title |
File |
Vol 2019, No 10 (2019) |
Effect of a Welding Method on the Fatigue Strength and Fracture of Foam–Aluminum Sandwiches |
(Eng)
|
Shapovalov O.S., Kodzhaspirov G.E., Hantelmann K., Mikhailov V.G.
|
Vol 2019, No 10 (2019) |
Failure of Pump–Compressor Pipes in Highly Aggressive Oil-Field Media |
(Eng)
|
Vyboishchik M.A., Ioffe A.V., Zyryanov A.O.
|
Vol 2019, No 10 (2019) |
Development of Structural Damage and Cracking in a Landing Head during Long-Term Operation under North Conditions |
(Eng)
|
Goritskii V.M., Muravin E.L., Shneiderov G.R.
|
Vol 2019, No 10 (2019) |
Application of Local Strengthening for Increasing the Strength of the Welded Joint of EP517 Steel and 36NKhTYu Alloy |
(Eng)
|
Terent’ev E.V., Marchenkov A.Y., Goncharov A.L., Sliva A.P.
|
Vol 2019, No 10 (2019) |
Effect of the Martensite Content on the Mechanical Behavior and the Acoustic Emission Characteristics of a Sheet TRIP Steel during Static Tension |
(Eng)
|
Teren’tev V.F., Roshchupkin V.V., Penkin A.G., Penkin M.A.
|
Vol 2019, No 10 (2019) |
Effect of Alloying Elements on the Hardening of Die Steels in the Austenitic State during High-Temperature Plastic Deformation |
(Eng)
|
Kruglyakov A.A.
|
Vol 2019, No 10 (2019) |
Fabrication of a High-Density Compacted Material from a Coarse-Grained Silicon Carbide Powder by Magnetic Pulsed Pressing Combined with Spark Plasma Sintering |
(Eng)
|
Shornikov D.P., Tenishev A.V., Kazakova V.N., Zholnin A.G.
|
Vol 2019, No 10 (2019) |
Properties of Longitudinal Welded Steel Pipes for Piled Foundations Built under Cryolithic Zone Conditions |
(Eng)
|
Odesskii P.D., Vershinin Y.V., Alekseev A.G., Zvezdov A.A.
|
Vol 2019, No 10 (2019) |
Creep of Tubes under External Pressure |
(Eng)
|
Vorob’ev E.E., Peregud M.M., Khokhunova T.N., Mileshkina O.Y., Bekrenev S.A., Markelov V.A., Shtremel’ M.A.
|
Vol 2019, No 4 (2019) |
Comparison of the Composite Materials Intended for Damping Elements for the Infrastructure of Rail Transport and Rolling Stock |
(Eng)
|
Kurzina E.G., Kolmakov A.G., Aksenov Y.N., Kurzina A.M., Bogachev A.Y., Semak A.V.
|
Vol 2019, No 4 (2019) |
Mechanical Properties and Structure of a VNS9-Sh Steel as Functions of the Tempering Temperature |
(Eng)
|
Terent’ev V.F., Ashmarin A.A., Blinova E.N., Titov D.D., Blinov V.M., Slizov A.K., Seval’neva T.G.
|
Vol 2019, No 4 (2019) |
Bending Failure of “Thick” Co-Based-Alloy Amorphous Wires |
(Eng)
|
Molokanov V.V., Chueva T.R., Umnova N.V., Umnov P.P., Krutilin A.V.
|
Vol 2019, No 4 (2019) |
Simulation of the Stamping of Spacing Grid Cells Made of Thin-Walled Zirconium Tubes |
(Eng)
|
Isaenkova M.G., Perlovich Y.A., Krymskaya O.A., Zhuk D.I., Stolbov S.D., Klyukova K.E., Ivanov A.V.
|
Vol 2019, No 4 (2019) |
Microstructure and Mechanical Properties of the Fuel Cladding in VVER-1000 after the Thermal Tests That Model Dry Storage Conditions |
(Eng)
|
Kobylyansky G.P., Obukhov A.V., Mazaev A.O., Zvir E.A., Ilyin P.A., Markelov D.E.
|
Vol 2019, No 4 (2019) |
Long-Term Annealing Resistance of Ferritic Chromium Steels Subjected to High-Temperature Nitriding |
(Eng)
|
Nikulin S.A., Khatkevich V.M., Rogachev S.O., Bekkaliev B.E., Belov V.A.
|
Vol 2019, No 4 (2019) |
Structure and Mechanical Properties of Cold-Deformed Galvanized Rolled Sheets for Light Thin-Walled Constructions |
(Eng)
|
Goritskii V.M., Kulemin A.M., Silina N.G.
|
Vol 2019, No 4 (2019) |
Influence of a Zinc Coating on the Mechanical Properties of a Low-Carbon Steel Microalloyed with Niobium |
(Eng)
|
Terent’ev V.F., Prosvirnin D.V., Marchenkov A.Y., Rybal’chenko O.V., Antonova O.S., Matyunin V.M.
|
Vol 2019, No 4 (2019) |
Strength Properties and Corrosion Resistance of Pump–Compressor Pipes Made of 15Kh5MFBCh Steel after Heat and Thermomechanical Treatment under Various Conditions |
(Eng)
|
Vyboishchik M.A., Ioffe A.V., Zyryanov A.O.
|
Vol 2018, No 10 (2018) |
Model for Predicting the Recrystallized Ferrite Grain Size after Annealing of Cold-Rolled Automobile Body Sheet Steels |
(Eng)
|
Vasilyev A.A., Sokolov S.F., Zhitelev P.S., Sokolov D.F., Kolbasnikov N.G., Rudskoy A.I.
|
Vol 2018, No 10 (2018) |
Estimation of the Degree of Recrystallization upon Annealing of Cold-Rolled Automobile Body Sheet Steels Using EBSD Analysis and Hardness Measurements |
(Eng)
|
Vasilyev A.A., Rudskoy A.I., Glukhov P.A., Sokolov S.F., Kolbasnikov N.G.
|
Vol 2018, No 10 (2018) |
Effect of Aging on the Nanostructuring and Strength of a D16 Aluminum Alloy |
(Eng)
|
Markushev M.V., Avtokratova E.A., Ilyasov R.R., Krymskiy S.V., Sitdikov O.S.
|
Vol 2018, No 10 (2018) |
Contributions of Various Mechanisms to the Hardening of Differentially Quenched Rails during Long-Term Operation |
(Eng)
|
Ivanov Y.F., Gromov V.E., Yur’ev A.A., Glezer A.M., Popova N.A., Peregudov O.A., Konovalov S.V.
|
Vol 2018, No 10 (2018) |
Effect of Alloying of Titanium Nickelide-Based Alloys with Group V Elements (Vanadium, Niobium) on Their Mechanical Properties |
(Eng)
|
Marchenko E.S., Baigonakova G.A., Gunther V.E.
|
Vol 2018, No 10 (2018) |
Possibility of Application of a 1565ch Alloy in the Automotive Industry |
(Eng)
|
Aryshenskii E.V., Guk S.V., Galiev E.E., Drits A.M., Kavalla R.
|
Vol 2018, No 4 (2018) |
Behavior of an Austenitic–Martensitic VNS9-Sh Sheet TRIP Steel during Static and Cyclic Deformation |
(Eng)
|
Teren’tev V.F., Prosvirnin D.V., Slizov A.K., Kobeleva L.I., Marchenkov A.Y., Ashmarin A.A., Sirotinkin V.P.
|
1 - 25 of 48 Items |
1 2 > >>
|