Enviar artigo por via de e-mail Structure and Plastic Flow Heterogeneities of the 12Kh18N9T Steel–St3 Steel Bimetal during Tension
- Autores: Barannikova S.1,2,3, Li Y.1, Lunev A.1, Shlyakhova G.1,4, Zuev L.1,2
-
Afiliações:
- Institute of Strength Physics and Materials Science, Siberian Branch
- Tomsk National Research State University
- Tomsk State University of Architecture and Building
- Seversk Institute of Technology
- Edição: Volume 2018, Nº 4 (2018)
- Páginas: 383-388
- Seção: Structure and Properties of the Deformed State
- URL: https://journals.rcsi.science/0036-0295/article/view/172491
- DOI: https://doi.org/10.1134/S003602951804002X
- ID: 172491
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The plastic deformation of a three-layer bimetallic composite, namely, structural low-carbon St3sp steel clad by an austenitic corrosion-resistant 12Kh18N9T steel on both sides is studied. The laws of Chernov–Lüders band propagation during uniaxial tension and the load that corresponds to the yield strength are considered.
Palavras-chave
Sobre autores
S. Barannikova
Institute of Strength Physics and Materials Science, Siberian Branch; Tomsk National Research State University; Tomsk State University of Architecture and Building
Autor responsável pela correspondência
Email: bsa@ispms.tsc.ru
Rússia, Tomsk, 634055; Tomsk, 634050; Tomsk, 634003
Yu. Li
Institute of Strength Physics and Materials Science, Siberian Branch
Email: bsa@ispms.tsc.ru
Rússia, Tomsk, 634055
A. Lunev
Institute of Strength Physics and Materials Science, Siberian Branch
Email: bsa@ispms.tsc.ru
Rússia, Tomsk, 634055
G. Shlyakhova
Institute of Strength Physics and Materials Science, Siberian Branch; Seversk Institute of Technology
Email: bsa@ispms.tsc.ru
Rússia, Tomsk, 634055; Seversk, 636036
L. Zuev
Institute of Strength Physics and Materials Science, Siberian Branch; Tomsk National Research State University
Email: bsa@ispms.tsc.ru
Rússia, Tomsk, 634055; Tomsk, 634050
