Effect of Homogenization on Microstructure and Properties of Al–Mg–Si Roll-Casting Sheet


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

The effect of homogenizing on the microstructure and properties of Al–Mg–Si roll-casting sheet were investigated by optical microscopy, scanning electron microscopy, energy dispersive spectroscopy, Vickers hardness measurements, and conductivity testing in this paper. The morphology, quantity, and species of the phases were studied. The results show that the Mg2Si dissolved completely and Al5(FeMnCr)Si transformed into Al74(MnFeCr)20Si6 phase during homogenization. And the wavy grain boundaries that existed in the roll-casting microstructure vanished. After homogenization at 550°C × 4 h, the sample hardness reduced to 54 HV and conductivity increased to 26 MS/m.

作者简介

Xianwei Ren

Research Institute of Light Alloys, Central South University; State Key Laboratory of High Performance and Complex Manufacturing, Central South University

编辑信件的主要联系方式.
Email: science@csu.edu.cn
中国, Changsha, 410083; Changsha, 410083

Yuanchun Huang

Research Institute of Light Alloys, Central South University; State Key Laboratory of High Performance and Complex Manufacturing, Central South University

Email: science@csu.edu.cn
中国, Changsha, 410083; Changsha, 410083

Yu Liu

Research Institute of Light Alloys, Central South University

Email: science@csu.edu.cn
中国, Changsha, 410083


版权所有 © Pleiades Publishing, Ltd., 2018
##common.cookie##