Effect of Homogenization on Microstructure and Properties of Al–Mg–Si Roll-Casting Sheet
- Авторлар: Xianwei Ren 1,2, Huang Y.1,2, Liu Y.1
-
Мекемелер:
- Research Institute of Light Alloys, Central South University
- State Key Laboratory of High Performance and Complex Manufacturing, Central South University
- Шығарылым: Том 119, № 8 (2018)
- Беттер: 789-796
- Бөлім: Structure, Phase Transformations, and Diffusion
- URL: https://journals.rcsi.science/0031-918X/article/view/167756
- DOI: https://doi.org/10.1134/S0031918X18080148
- ID: 167756
Дәйексөз келтіру
Аннотация
The effect of homogenizing on the microstructure and properties of Al–Mg–Si roll-casting sheet were investigated by optical microscopy, scanning electron microscopy, energy dispersive spectroscopy, Vickers hardness measurements, and conductivity testing in this paper. The morphology, quantity, and species of the phases were studied. The results show that the Mg2Si dissolved completely and Al5(FeMnCr)Si transformed into Al74(MnFeCr)20Si6 phase during homogenization. And the wavy grain boundaries that existed in the roll-casting microstructure vanished. After homogenization at 550°C × 4 h, the sample hardness reduced to 54 HV and conductivity increased to 26 MS/m.
Негізгі сөздер
Авторлар туралы
Xianwei Ren
Research Institute of Light Alloys, Central South University; State Key Laboratory of High Performance and Complex Manufacturing, Central South University
Хат алмасуға жауапты Автор.
Email: science@csu.edu.cn
ҚХР, Changsha, 410083; Changsha, 410083
Yuanchun Huang
Research Institute of Light Alloys, Central South University; State Key Laboratory of High Performance and Complex Manufacturing, Central South University
Email: science@csu.edu.cn
ҚХР, Changsha, 410083; Changsha, 410083
Yu Liu
Research Institute of Light Alloys, Central South University
Email: science@csu.edu.cn
ҚХР, Changsha, 410083