Effect of Homogenization on Microstructure and Properties of Al–Mg–Si Roll-Casting Sheet


Цитировать

Полный текст

Открытый доступ Открытый доступ
Доступ закрыт Доступ предоставлен
Доступ закрыт Только для подписчиков

Аннотация

The effect of homogenizing on the microstructure and properties of Al–Mg–Si roll-casting sheet were investigated by optical microscopy, scanning electron microscopy, energy dispersive spectroscopy, Vickers hardness measurements, and conductivity testing in this paper. The morphology, quantity, and species of the phases were studied. The results show that the Mg2Si dissolved completely and Al5(FeMnCr)Si transformed into Al74(MnFeCr)20Si6 phase during homogenization. And the wavy grain boundaries that existed in the roll-casting microstructure vanished. After homogenization at 550°C × 4 h, the sample hardness reduced to 54 HV and conductivity increased to 26 MS/m.

Об авторах

Xianwei Ren

Research Institute of Light Alloys, Central South University; State Key Laboratory of High Performance and Complex Manufacturing, Central South University

Автор, ответственный за переписку.
Email: science@csu.edu.cn
Китай, Changsha, 410083; Changsha, 410083

Yuanchun Huang

Research Institute of Light Alloys, Central South University; State Key Laboratory of High Performance and Complex Manufacturing, Central South University

Email: science@csu.edu.cn
Китай, Changsha, 410083; Changsha, 410083

Yu Liu

Research Institute of Light Alloys, Central South University

Email: science@csu.edu.cn
Китай, Changsha, 410083

Дополнительные файлы

Доп. файлы
Действие
1. JATS XML

© Pleiades Publishing, Ltd., 2018

Согласие на обработку персональных данных

 

Используя сайт https://journals.rcsi.science, я (далее – «Пользователь» или «Субъект персональных данных») даю согласие на обработку персональных данных на этом сайте (текст Согласия) и на обработку персональных данных с помощью сервиса «Яндекс.Метрика» (текст Согласия).