🔧На сайте запланированы технические работы
25.12.2025 в промежутке с 18:00 до 21:00 по Московскому времени (GMT+3) на сайте будут проводиться плановые технические работы. Возможны перебои с доступом к сайту. Приносим извинения за временные неудобства. Благодарим за понимание!
🔧Site maintenance is scheduled.
Scheduled maintenance will be performed on the site from 6:00 PM to 9:00 PM Moscow time (GMT+3) on December 25, 2025. Site access may be interrupted. We apologize for the inconvenience. Thank you for your understanding!

 

Іздеу

Шығарылым
Атауы
Авторлар
Structure, mechanical, and tribotechnical properties of an austenitic nitrogen steel after frictional treatment
Narkevich N., Shulepov I., Mironov Y.
Formation of the Structure and Properties upon Thermohydrogen Treatment of the Alloy Based on Titanium Aluminide Ti2AlNb
Illarionov A., Khadzhieva O., Illarionova S., Merson E.
Atomic Ordering of Soft Magnetic Fe–Si Alloys and Effect of Thermomagnetic Treatment
Gubernatorov V., Dragoshanskii Y., Sycheva T.
Magnetic Properties of the Fe63.5Ni10Cu1Nb3Si13.5B9 Alloy Nanocrystallized in the Presence of Tensile Stresses
Lukshina V., Dmitrieva N., Volkova E., Shishkin D.
Development of High-Strength, Fine, and Ultrafine-Grained Shape Memory Alloys
Pushin V., Kuranova N., Pushin A.
Microstructure and Mechanical Properties of a Near-α-Titanium-Alloy/TiB Composite Prepared in situ by Casting and Subjected to Deformation and Heat Treatment
Gaisin R., Imayev V., Imayev R.
Microstructural Evolution of Iron Based Alloys Produced by Spark Plasma Sintering Method
Muthuchamy A., Annamalai A., Karthikeyan M., Thakur A., Nagaraju N., Agrawal D.
Comparing Microstructures and Tensile Properties of Intercritically Annealed and Quenched-Tempered 1.7Ni–1.5Cu–0.5Mo–0.2C Powder Metallurgy Steels
Güral A., Başak H., Türkan M.
Evolution of the structure and mechanical properties of a bulk-nitrided corrosion-resistant ferritic steel upon tempering in the temperature range of 400–700°C
Rogachev S., Nikulin S., Khatkevich V.
Microstructural, mechanical, and electrical characterization of directionally solidified Al–Cu–Mg eutectic alloy
Kaygısız Y., Maraşlı N.
Magnetic properties of RCo2 compounds in the exchange-striction model of ferrimagnets
Valiev E., Teplykh A.
New Fe−Co−Ni−Cu−Al−Ti Alloy for Single-Crystal Permanent Magnets
Belyaev I., Bazhenov V., Moiseev A., Kireev A.
Improvement of mechanical properties of the Ti–45Al–5Nb–1Mo–0.2B (аt %) intermetallic alloy by means of microstructure controlling
Nazarova T., Imaev V., Imaev R., Mulyukov R.
Effect of Deep Cryogenic Treatment on Aging Processes of Al–Mg–Si Alloy
Yuanchun Huang , Li Y., Ren X., Xiao Z.
Structure and Properties of Antifriction Cu, Cu–C, and DLC Coatings
Kiryukhantsev-Korneev F., Bondarev A.
Effect of the Rate, Temperature, and Magnitude of Prestraining on the Parameters of Phase Transformations and the Thermomechanical Characteristics of the 45% Ti–45% Ni–10% Nb Shape Memory Alloy in Press-Formed Conditions
Popov N., Sysoeva T., Presnyakov D., Kostyleva A.
Electronic Structure and Magnetic Properties of Strongly Correlated Transition Metal Compounds
Anisimov V., Lukoyanov A., Skornyakov S.
Microstructure Homogeneity and Mechanical Properties of Large-Size As-Cast High Nb Containing TiAl Alloy Ingot
Xu M., Zhang C., Han J., Chen Y., Kong F., Chen Y., Zhang S.
Effect of Granular Spacer on the Exchange Bias Effect in FeMn-Based Film Structures
Gorkovenko A., Lepalovskij V., Vas’kovskiy V.
Analysis of the Deformation Process in Ni3(Al, Fe) Intermetallic under Longitudinal Bending
Kazantseva N., Davydov D., Ezhov I., Shishkin D., Vinogradova N., Terent’ev P.
Influence of water vapor on the formation of pinning centers in YBa2Cu3Oy upon low-temperature annealing
Bobylev I., Gerasimov E., Zyuzeva N.
Effect of the quasi-continuous equal-channel angular pressing on the structure and functional properties of Ti–Ni-based shape-memory alloys
Khmelevskaya I., Karelin R., Prokoshkin S., Andreev V., Yusupov V., Perkas M., Prosvirnin V., Shelest A., Komarov V.
Embrittlement and conditions of the optimization of magnetic properties in the amorphous alloy Co69Fe3.7Cr3.8Si12.5B11 in the absence of a viscous–brittle transition
Kekalo I., Mogil’nikov P.
The formation, structure, and properties of the Au–Co alloys produced by severe plastic deformation under pressure
Tolmachev T., Pilyugin V., Ancharov A., Chernyshov E., Patselov A.
Thermal stability of magnetic properties of nanocrystalline (Fe0.7Co0.3)88Hf4Mo2Zr1B4Cu1 alloy with induced magnetic anisotropy
Dmitrieva N., Lukshina V., Filippov B., Potapov A.
Нәтижелер 101 - 1/25 1 2 3 4 5 > >> 
Сыбырсөздер:
  • Негізгі сөздер тіркелімге сезімтал< / li>
  • Ағылшын предлогтары мен одақтары еленбейді
  • Әдепкі бойынша іздеу барлық негізгі сөздер үшін жасалады (агенс AND экспериенцер)
  • Белгілі бір терминді табу үшін OR қолданыңыз. білім беру OR оқыту
  • мысалы, күрделі сөз тіркестерін жасау үшін жақшаларды қолданыңыз. мұрағат ((журналдар OR конференциялар) NOT диссертациялар)
  • Нақты фразаны табу үшін, мысалы, тырнақшаларды қолданыңыз. "ғылыми зерттеулер"
  • сөзді - (сызықша) немесе not операторының көмегімен алып тастаңыз; мысалы. сұлулық байқауы< / em > немесе сұлулық байқауы< / em > < / li>
  • мысалы, нұсқа ретінде * қолданыңыз. ғылым* "ғылыми","ғылыми"және т. б. сөздерді қамтиды< / li> < / < / к-сі>