Enviar artigo por via de e-mail Influence of Precursor Gas Flow Rate on Fluoropolymer Coating Growth Rate During Hot Wire Chemical Vapor Deposition
- Autores: Safonov A.I.1, Sulyaeva V.S.2, Bogoslovtseva A.L.1, Timoshenko N.I.1
-
Afiliações:
- Kutateladze Institute of Thermophysics, Siberian Branch
- Nikolaev Institute of Inorganic Chemistry, Siberian Branch
- Edição: Volume 59, Nº 5 (2018)
- Páginas: 842-846
- Seção: Article
- URL: https://journals.rcsi.science/0021-8944/article/view/161309
- DOI: https://doi.org/10.1134/S0021894418050103
- ID: 161309
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The formation of a fluoropolymer coating by chemical deposition has been studied experimentally. It has been found that increasing the flow rate of the precursor gas leads to a decrease in the growth rate of the coating. Deposition conditions were analyzed, and the gas-dynamic parameters of the process were estimated. The estimates are consistent with experimental data.
Palavras-chave
Sobre autores
A. Safonov
Kutateladze Institute of Thermophysics, Siberian Branch
Autor responsável pela correspondência
Email: safonov@itp.nsc.ru
Rússia, Novosibirsk, 630090
V. Sulyaeva
Nikolaev Institute of Inorganic Chemistry, Siberian Branch
Email: safonov@itp.nsc.ru
Rússia, Novosibirsk, 630090
A. Bogoslovtseva
Kutateladze Institute of Thermophysics, Siberian Branch
Email: safonov@itp.nsc.ru
Rússia, Novosibirsk, 630090
N. Timoshenko
Kutateladze Institute of Thermophysics, Siberian Branch
Email: safonov@itp.nsc.ru
Rússia, Novosibirsk, 630090
Arquivos suplementares
