Influence of Rheological Characteristics of Solutions of Mixtures of N-Succinyl Chitosan and Carboxymethylcellulose Sodium Salts on Some Properties of Materials Obtained from These Solutions
- Authors: Bazunova M.V.1, Shurshina A.S.1, Chernova V.V.1, Lazdin R.Y.1, Kulish E.I.1
-
Affiliations:
- Bashkir State University
- Issue: Vol 65, No 1 (2023)
- Pages: 52-60
- Section: Articles
- URL: https://journals.rcsi.science/2308-1139/article/view/135615
- DOI: https://doi.org/10.31857/S2308113923700316
- EDN: https://elibrary.ru/PIAQND
- ID: 135615
Cite item
Abstract
Structuring in solutions of the individual polymers sodium N-succinyl chitosan and sodium carboxymethylcellulose and their mixtures has been experimentally evaluated. The possibility of controlling both the degree of enzymatic degradation and other properties of materials obtained on their basis is shown. In binary mixtures, supramolecular structures represented by homoaggregates of both polymers are likely to appear, which are characterized by an increased packing density and a slow rate of chemical and biochemical transformations. The mixing of N-succinyl chitosan and carboxymethylcellulose sodium salts in solution enhances aggregation processes. The type of aggregates (homo- or hetero-) is determined by the concentration of the polymers in the initial solution: homoaggregates are formed in dilute solutions of the mixture (with a concentration on the order of the entanglement-network formation concentration), and mixed heteroaggregates appear in more concentrated solutions. It has been established that the stress–strain characteristics, the degree of enzymatic hydrolysis increases, and the sorption capacity of film materials obtained from such mixtures are enhanced (compared to additive values) when heteroaggregates appear in a solution of polymer mixtures, whereas all these parameters have reduced values when homoaggregates are formed in solutions of polymer mixtures.
About the authors
M. V. Bazunova
Bashkir State University
Email: mbazunova@mail.ru
450076, Ufa, Bashkortostan, Russia
A. S. Shurshina
Bashkir State University
Email: mbazunova@mail.ru
450076, Ufa, Bashkortostan, Russia
V. V. Chernova
Bashkir State University
Email: mbazunova@mail.ru
450076, Ufa, Bashkortostan, Russia
R. Yu. Lazdin
Bashkir State University
Email: mbazunova@mail.ru
450076, Ufa, Bashkortostan, Russia
E. I. Kulish
Bashkir State University
Author for correspondence.
Email: mbazunova@mail.ru
450076, Ufa, Bashkortostan, Russia
References
- Олтаржевская Н.Д., Коровина М.А., Савилова Л.Б. // Росс. хим. журн. 2002. Т. XLVI. № 1. С. 133.
- Штильман М.И. Полимеры медико-биологического назначения. М.: Академкнига, 2006.
- Сливкин Д.А., Лапенко В.Л., Сафонова О.А., Суслина С.Н., Беленова А.С. // Вестн. Воронежского гос. ун-та. 2011. № 2. С. 214.
- Shurshina A.S., Bazunova M.V., Chernova V.V., Galina A.R., Lazdin R.Y., Kulish E.I. // Polymer Science A. 2020. V. 62. № 4. P. 422.
- Bazunova M.V., Sharafutdinova L.A., Lazdin R.Y., Chernova V.V., Mixonov D.N., Zakharov V.P. // Appl. Biochem. Microbiol. 2018. V. 54. № 5. P. 474.
- Material Science of Chitin and Chitosan / Eds by T. Uragami, S. Tokura. Tokyo: Springer, 2006.
- Dang Duc Long, Dang Van Luyen // J. Macromol. Sci. 1996. V. 33. № 12. P. 1875.
- Rashmi Boppana // J. Microencapsul. 2010. V. 27. № 4. P. 3.
- Kato Y., Onishi H., Machida Y. // Biomaterials. 2004. V. 25. № 5. P. 907.
- Yan C., Gu J., Hou D., Jing H., Wang J., Guo Y., Yamamoto A. // Int. J. Biol. Macromol. 2015. V. 72. P. 751.
- Лаздин Р.Ю., Чернова В.В., Кулиш Е.И., Захаров В.П. // Сб. ст. материалов Международной научной конференции “Полифункциональные химические материалы и технологии” / Под ред. Ю.Г. Слижова. Томск: Национальный исследовательский Томский гос. ун-т, 2019. С. 91. Т. 1.
- Chernova V.V., Valiev D.R., Bazunova M.V., Shur-shina A.S., Kulish E.I. // Russ. J. Appl. Chem. 2019. V. 92. № 3. P. 332.
- Валиев Д.Р., Базунова М.В., Чернова В.В., Шуршина А.С., Кулиш Е.И. // Перспективные материалы. 2018. № 4. С. 14.
- Базунова М.В., Чернова В.В., Лаздин Р.Ю., Захаров В.П., Кулиш Е.И. // Хим. физика. 2018. Т. 37. № 12. С. 51.
- Litmanovich E.A., Orleneva A.P., Korolev B.A., Kasaikin V.A., Kulichikhin V.G. // Polymer Science A. 2000. V. 42. № 6. P. 689.
- Savencu I., Ioana S., Sonia I., Alina P., Cătălina B., Ioan T. // React. Funct. Polym. 2021. V. 168. P. 109.
- Raj S., Kumar P., Sharma R., Malviya R. // Curr. Smart Mater. 2018. V. 1. № 3. P. 38.
- Izumrudov V.A., Mussabayeva B.Kh., Kassymova Z.S., Klivenko A.N., Orazzhanova L.K. // Russ. Chem. Rev. 2019. V. 88. № 10. P. 1046.
- Bochek A.M., Shevchuk I.L., Kalyuzhnaya L.M. // Russ. J. Appl. Chem. 2010. V. 83. № 4. P. 712.
- Teodorescu M., Bercea M. // Polym. Plast. Technol. Eng. 2015. V. 54. № 9. P. 923.
- Kononova S.V., Gubanova G.N., Romashkova K.A., Smirnova V.E., Popova E.N., Vlasova E.N., Kruchinina E.V., Gofman I.V., Saifutdinova I.F., Romanov D.P. // Polymer Science A. 2016. V. 58. № 3. P. 419.
- Падохин В.А., Ганиев Р.Ф., Кочкина Н.Е. // Докл. РАН. 2007. Т. 416. № 2. С. 219.
- Shurshina A.S., Chernova V.V., Lazdina M.Yu., Titlova A.S., Kulish E.I. // Lett. Mater. 2022. V. 12. № 3(47). P. 209.
- Ахметханов Р.М., Чернова В.В., Шуршина А.С., Лаздина М.Ю., Кулиш Е.И. // Конденсированные среды и межфазные границы. 2021. Т. 23. № 2. С. 188.
- Kulish E.I., Lazdin R.Y., Shurshina A.S., Kolesov S.V., Zakharova E.M., Zakharov V.P. // Polymer Science A. 2021. V. 63. № 1. P. 54.
- Сонина А.Н., Успенский С.А., Вихорева Г.А., Филатов Ю.Н., Гапьбрайх Л.С. // Хим. волокна. 2010. № 6. С. 11.
- Баранов В.Г., Амрибахшов Д.Х., Агранова С.А., Френкель С.Я. // Высокомол. соедин. Б. 1988. Т. 30. № 5. С. 384.
- Баранов В.Г., Френкель С.Я., Агранова С.А., Бресткин Ю.В., Пинкевич В.Н., Шабсельс Б.М. // Высокомол. соедин. 1987. Т. 29. № 10. С. 745.
- Philippova O.E., Korchagina E.V. // Polymer Science A. 2012. V. 54. № 7. P. 552.
- Al Joda H.N.A., Pyshnograi G.V., Shipovskaya A.B., Tregubova Y.B., Zinovich S.A. // Mechan. Comp. Mater. 2016. V. 52. № 5. P. 637.
- Shipovskaya A.B., Rudenko D.A., Fomina V.I., Ost-rovsky N.V. // Eur. J. Natural History. 2012. № 6. P. 7.
Supplementary files
