| Issue |
Title |
File |
| No 4 (166) (2025) |
TECHNOLOGY AND RESULTS OF STUDYING THE DIVERSIFICATION OF THE OPERATIVE CONDITIONS OF METAL CUTTING TOOLS |
(Rus)
|
|
Brovkova3 M.B., Kuptsova A.V., Kuptsov P.V., Martynov V.V.
|
| No 5 (167) (2025) |
PROCCESSING CHARACTERISTICS STUDY FOR THE ALLOY OBTAINED THROUGH ADDITIVE TECHNOLOGY EBAM (INCONEL 625) UNDER MILLING |
(Rus)
|
|
Babaev A.S., Kozlov V.N., Ovcharenko V.A., Semenov A.R., Belchikov I.A.
|
| No 1 (163) (2025) |
INCREASING THE EFFICIENCY OF COAL MASS GRINDING BY CHANGING THE GEOMETRY OF THE IMPACT SURFACE OF THE GRINDING WHEEL |
(Rus)
|
|
Chetverikov S.V.
|
| No 5 (167) (2025) |
SURFACE WEAR RESISTANCE INCREASE FOR PARTS IN PRECISION FRICTION PAIRS OF AGRICULTURAL MACHINES UNDER FINAL ANTIFRICTION NONABRASIVE MACHINING |
(Rus)
|
|
Pogonyshev V.A., Mokshin I.A., Pogonysheva D.A., Bychkova T.V.
|
| No 6 (168) (2025) |
ENGINEERING SUPPORT PROBLEM FOR THE STABILITY ASSUARANCE IN DEEP DRILLING OPERATIONS FOR LARGE-SIZED FORGING AND PRESSING BLANKS WORK ON MULTI-PURPOSE CNC MACHINES |
(Rus)
|
|
Ingemansson A.R., Tolstyakov N.A.
|
| No 2 (164) (2025) |
ABRASIVE WEAR PRODUCTS TRANSPORT DURING TITANIUM SCRATCHING AND ABRASION |
(Rus)
|
|
Nosenko V.A., Kuznetsov S.P., Serdyukov N.D., Kharlamov V.O.
|
| No 4 (166) (2025) |
THE IMPREGNATED ABRASIVE TOOL POTENCY IN MECHANICAL TOOLING OF BEARING PARTS |
(Rus)
|
|
Dushko O.V., Kryukov S.A.
|
| No 10 (172) (2025) |
FINISHING AND STRENGTHENING ROTARY RUNNING-IN TECHNOLOGY FOR LONG THIN-WALLED PIPES |
(Rus)
|
|
Sidyakin Y.I., Julius L. T.L., Lavrentiev A.M., Abakumova S.Y., Olshtynsky S.N.
|
| No 9 (171) (2025) |
CHIP MORPHOLOGY AND WEAR PROCESS OF THE OPERATING FLOOR OF A CARBIDE END MILL IN THE TREATMENT OPERATION OF INCONEL 625 ALLOY |
(Rus)
|
|
Babaev A.S., Kozlov V.N., Savchenko N.L., Ovcharenko V.A., Belchikov I.A., Semenov A.R.
|
| No 7 (157) (2024) |
CUTTING ABILITY FEATURES FOR NEW HIGH-STRENGTH TITANIUM ALLOYS WITH AN ULTRAFINE-GRAINED STRUCTURE USED FOR AIRCRAFT PARTS |
(Rus)
|
|
Makarov V.F., Pesin M.V., Konogorova3 L.V., Khabarova4 A.V., Abzaev R.S.
|
| No 9 (159) (2024) |
SYSTEM-SYNERGETIC ANALYSIS AND SYNTHESIS OF A CONTROLLED CUTTING PROCESS |
(Rus)
|
|
Zakovorotny V.L., Gvindzhiliya V.E.
|
| No 1 (151) (2024) |
THE DEVELOPMENT OF COMPUTER-AIDED PLANNING PRINCIPLES FOR MULTIPRODUCT MACHINING PROCESSES |
(Rus)
|
|
Mitin S.G., Bochkarev P.Y.
|
| No 1 (151) (2024) |
INVESTIGATION OF MODE ELEMENTS EFFECT AND THE INFLUENCE OF MILLING CUTTER TEETH SPACE ON TECHNOLOGICAL PARAMETERS AND TEMPERATURE FIELD OF WORK ON A THIN-WALLED PARTS WORKPIECE |
(Rus)
|
|
Unyanin A.N., Chudnov A.V.
|
| No 11 (161) (2024) |
EFFECTIVE WAYS OF SHARPENING METAL-CUTTING TOOLS MADE OF RAPID STEEL AND HARD ALLOYS |
(Rus)
|
|
Butenko V.I., Lebedev V.A., Kolganova E.N., Kadach R.G.
|
| No 4 (154) (2024) |
MODELING CHARACTERISTICS FOR SURFACE FINISH WHEN MILLING STAINLESS STEELS USING VARIOUS MEDIA |
(Rus)
|
|
Vaniev E.R., Dzhemalyadinov R.M., Temindarov I.E., Bekirov E.L.
|
| No 10 (160) (2024) |
REVISITING TECHNOLOGICAL PARAMETERS DETERMINATION OF COMPLEX SCULPTURED SURFACING FOR GTE BLADES UNDER SMOOTH FINISH |
(Rus)
|
|
Mikhailov A.N., Anastas'ev A.V.
|
| No 10 (160) (2024) |
MODELING OF HEAT TRANSFER OPERATION WITHIN THERMAL FRICTION CUTTING FOR CONSTRUCTIONAL STEEL WORKPIECES |
(Rus)
|
|
Yakubov C.F., Pokintelitsa N.I., Bratan S.M., Chasovitina A.S.
|
| No 6 (156) (2024) |
TRANSFORMATION OF NARRATIVES OF THE CUTTING OPERATION THEORY IN PASSING TO THE «DIGIT» |
(Rus)
|
|
Chigirinsky J.L., Krainev D.V., Frolov E.M.
|
| No 5 (155) (2024) |
TOOL DEGRADATION EFFECT ON ROUGHNESS FACTOR IN THE PROCESS OF PHYSICAL MODELING OF CYLINDRICAL GEAR SHAVING AND ROLLING |
(Rus)
|
|
Malikov A.A., Sidorkin A.V., Artamonov V.D., Kovalev Y.V.
|
| No 5 (155) (2024) |
ANALYSIS OF METAL-CUTTING MACHINES IN-TENDED SERVICE |
(Rus)
|
|
Bazrov B.M.
|
| No 12 (150) (2023) |
STUDY OF THE TECHNIQUE PERFORMANCE FOR THE CORRECTION OF THE MODE OF THE MACHINING PROCESS WITH TIME-VARYING PARAMETERS IN THE CONDITIONS OF TECHNOLOGICAL INFORMATION UNCERTAINTY |
(Rus)
|
|
Unyanin A.N., Finageev P.R.
|
| No 11 (149) (2023) |
ORGANIZATION OF SMALL-SCALE PRODUCTION OF PARTS BASED ON MODULE TECHNOLOGY PATTERNS |
(Rus)
|
|
Boris M. B.M.
|
| No 11 (149) (2023) |
MULTIPLE-CRITERIA OPTIMIZATION OF OPERATIONAL MODES OF TECHNOLOGICAL PROCESSES |
(Rus)
|
|
Totay A.V., Nagorkin M.N., Selifonov V.S.
|
| No 10 (148) (2023) |
CALCULATION OF HIGH-DUTY COLD REDUCTION ROLLERS GRINDING CYCLES BASED ON RADIAL FORCE CYCLE OPTIMIZATION |
(Rus)
|
|
Bratan S.M., Golovin V.I., Novosyolov Y.K., Dymchenko I.A.
|
| No 9 (147) (2023) |
DESIGN OF PROCESSING TECHNOLOGY IN GRANULATED MEDIA IN THE CONDITIONS OF DIGITAL PRODUCTION |
(Rus)
|
|
Tamarkin M.A., Tischenko E.E.
|
| 1 - 25 of 37 Items |
1 2 > >>
|
