检索

标题
作者
Properties of Electrolytic Silver-Based Alloy
Balakai V., Arzumanova A., Starunov A., Balakai I.
Scientific and Technological Bases for Developing Cold-Resistant Steel with a Guaranteed Yield Strength of 315–750 MPa for Arctic Conditions: Part 2. Manufacturing Technology, Structure, Properties, and Serviceability of Sheet Products
Sych O.
Special features of surface fluorination of thermoplastic polyurethane elastomers and its effect on the polymer properties
Nazarov V., Stolyarov V., Petrova G., Gryaznov V., Buznik V.
Scientific and Technological Bases for Developing Cold-Resistant Steel with a Guaranteed Yield Strength of 315–750 MPa for Arctic Conditions. Part 1: Alloying Principles and Requirements for Sheet Product Structure
Sych O.
Properties of Composite Electrolytic Coating Nickel–Cobalt–Aluminum Oxide–Fluoroplastic
Balakai V., Murzenko K., Arzumanova A., Balakai I.
Investigation of Formation of Titanium–Copper Coatings upon Argon Arc Surfacing of Silicon Bronze on Titanium
Kovtunov A., Semistenova T., Ostryanko A., Bochkarev A.
Factors Influencing the Fire-Resistance of Epoxy Compositions Modified with Epoxy-Containing Phosphazenes
Terekhov I., Chistyakov E., Filatov S., Deev I., Kurshev E., Lonskii S.
Features of the Plastic Flow of Sintered Al–12Si–xSn Alloys
Rusin N., Skorentsev A.
Laser Dispersion of Titanium and Magnesium Oxides in Zr–1% Nb Alloy Affecting Surface Structure and Protective Properties
Bashkova I., Reshetnikov S., Gil’mutdinov F., Kharanzhevskii E.
Radiation hardening of constructional cement–magnetite–serpentinite composite under gamma irradiation at increased dose
Yastrebinskii R., Bondarenko G., Pavlenko V.
Studies on the cyclic crack resistance of high-strength steels for assessing the service life of deep-sea equipment
Sadkin K., Ilyin A., Lavrentyev A.
Influence of nanoparticles of cesium sulfate and deformation on structure, vibration spectra, and luminescence of polystyrene
Pokidov A., Klassen N., Kedrov V., Shmytko I., Bazhenov A., Fursova T.
Synthesis and Electron Beam Facing of Titanium Monoboride–Titanium Matrix Composite Powders
Pribytkov G., Korzhova V., Krinitsyn M., Firsina I.
Technological Parameters of Production and Properties of Babbit-Based Composite Surfacing Rods and Deposited Antifriction Coatings
Kalashnikov I., Kolmakov A., Bolotova L., Bykov P., Kobeleva L., Mikheev R., Kheifets M.
Influence of Neutron Irradiation and Post-Irradiation Annealing on Mechanical Properties and Fracture Toughness of Anticorrosive Cladding for VVER-Type Reactors: Part 2. Predictive Modeling of the Mechanical Properties and Fracture Toughness of Cladding
Margolin B., Kostylev V., Morozov A., Varovin A., Belyaeva L., Potapova V., Smirnov V., Prokoshev O., Petrov S.
Tribotechnical Properties of Composite Material “Aluminum–Carbon Nanofibers” under Friction on Steels 12Kh1 and ShKh15
Breki A., Kol’tsova T., Skvortsova A., Tolochko O., Aleksandrov S., Kolmakov A., Lisenkov A., Gvozdev A., Fadin Y., Provotorov D.
Research of physicochemical properties and structure of strongly doped LiNbO3:ZnO ([ZnO] ~ 4.02–8.91 mol %) crystals
Palatnikov M., Sidorov N., Aleshina L., Kadetova A., Biryukova I., Makarova O.
Corrosion resistance problems of low-magnetic shipbuilding steels
Mushnikova S., Kalinin G., Kharkov A.
Deformation behavior features of composite of polystyrene with cesium sulfate filler during ultraviolet and X-ray irradiation
Pokidov A., Klassen N., Kedrov V., Shmytko I.
Structure and Properties of the Intermetallic Alloy Based on Nickel Aluminide Microalloyed with Rare Earth Metals
Bazyleva O., Arginbaeva E., Shestakov A., Fesenko T.
Increase in Wear Resistance of the Surface Layers of AK10M2N Silumin at Electron-Beam Treatment
Zagulyaev D., Gromov V., Konovalov S., Ivanov Y.
Influence of Neutron Irradiation and Post-Irradiation Annealing on Mechanical Properties and Fracture Toughness of the Anticorrosive Cladding for VVER-Type Reactors: Part 1. Mechanisms of Embrittlement and Recovery of Cladding Properties
Margolin B., Morozov A., Varovin A., Kostylev V., Belyaeva L., Potapova V., Smirnov V., Prokoshev O., Petrov S.
Structure and Properties of the B83 Babbit Alloy Based Composite Materials Produced by Extrusion
Bolotova L., Kalashnikov I., Kobeleva L., Bykov P., Katin I., Kolmakov A., Podymova N.
Production of antifriction composite filler rods based on babbit B83 by extrusion
Mikheev R., Kobernik N., Kalashnikov I., Bolotova L., Katin I., Kobeleva L., Kolmakov A.
Creation of composite nanostructured surface-reinforced powder materials based on Ti/WC and Ti/TiCN used for coatings with enhanced hardness
Bobkova T., Farmakovskii B., Bogdanov S.
1 - 25 的 51 信息 1 2 3 > >> 

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回(例如,隐含AND)
  • 使用OR结合多个检索词,便于查找含有这些检索词的文章,例如education OR research
  • 使用括号来创建更复杂的查询; 例如:archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如: "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如:online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##