电邮这篇文章 Study of Formation of Welded Joint Produced by Laser Overlap Welding of Aluminum AMg2M Alloy and St3 Steel
- 作者: Lyukhter A.B.1, Shlegel A.N.2, Gusev D.S.1,3, Samarin S.S.1
-
隶属关系:
- Engineering Center for the Use of Laser Technologies in Mechanical Engineering
- New Technologies of Laser Thermal Hardening LLC
- EC at VSU LLC
- 期: 卷 9, 编号 4 (2018)
- 页面: 709-713
- 栏目: Article
- URL: https://journals.rcsi.science/2075-1133/article/view/207596
- DOI: https://doi.org/10.1134/S2075113318040214
- ID: 207596
如何引用文章
开放存取
##reader.subscriptionAccessGranted##
订阅存取
详细
In this experimental study, we used an aluminum AMg2M alloy and St3 steel as proxies to determine the discontinuity, the ultimate strength, the value of the relative elongation, and the width and depth of the welded joint as a function of the technological parameters of laser overlap welding. The physical and mechanical properties of the welded joints were found to be close to those of AMg2M.
作者简介
A. Lyukhter
Engineering Center for the Use of Laser Technologies in Mechanical Engineering
编辑信件的主要联系方式.
Email: 3699137@mail.ru
俄罗斯联邦, Vladimir, 600014
A. Shlegel
New Technologies of Laser Thermal Hardening LLC
Email: 3699137@mail.ru
俄罗斯联邦, Vladimir, 600023
D. Gusev
Engineering Center for the Use of Laser Technologies in Mechanical Engineering; EC at VSU LLC
Email: 3699137@mail.ru
俄罗斯联邦, Vladimir, 600014; Vladimir, 600000
S. Samarin
Engineering Center for the Use of Laser Technologies in Mechanical Engineering
Email: 3699137@mail.ru
俄罗斯联邦, Vladimir, 600014
补充文件
