Enviar artigo por via de e-mail Study of Formation of Welded Joint Produced by Laser Overlap Welding of Aluminum AMg2M Alloy and St3 Steel
- Autores: Lyukhter A.1, Shlegel A.2, Gusev D.1,3, Samarin S.1
-
Afiliações:
- Engineering Center for the Use of Laser Technologies in Mechanical Engineering
- New Technologies of Laser Thermal Hardening LLC
- EC at VSU LLC
- Edição: Volume 9, Nº 4 (2018)
- Páginas: 709-713
- Seção: Article
- URL: https://journals.rcsi.science/2075-1133/article/view/207596
- DOI: https://doi.org/10.1134/S2075113318040214
- ID: 207596
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
In this experimental study, we used an aluminum AMg2M alloy and St3 steel as proxies to determine the discontinuity, the ultimate strength, the value of the relative elongation, and the width and depth of the welded joint as a function of the technological parameters of laser overlap welding. The physical and mechanical properties of the welded joints were found to be close to those of AMg2M.
Palavras-chave
Sobre autores
A. Lyukhter
Engineering Center for the Use of Laser Technologies in Mechanical Engineering
Autor responsável pela correspondência
Email: 3699137@mail.ru
Rússia, Vladimir, 600014
A. Shlegel
New Technologies of Laser Thermal Hardening LLC
Email: 3699137@mail.ru
Rússia, Vladimir, 600023
D. Gusev
Engineering Center for the Use of Laser Technologies in Mechanical Engineering; EC at VSU LLC
Email: 3699137@mail.ru
Rússia, Vladimir, 600014; Vladimir, 600000
S. Samarin
Engineering Center for the Use of Laser Technologies in Mechanical Engineering
Email: 3699137@mail.ru
Rússia, Vladimir, 600014
