| 期 |
标题 |
文件 |
| 卷 10, 编号 6 (2019) |
Scientific and Technological Bases for Developing Cold-Resistant Steel with a Guaranteed Yield Strength of 315–750 MPa for Arctic Conditions. Part 1: Alloying Principles and Requirements for Sheet Product Structure |
(Eng)
|
|
Sych O.
|
| 卷 10, 编号 6 (2019) |
Scientific and Technological Bases for Developing Cold-Resistant Steel with a Guaranteed Yield Strength of 315–750 MPa for Arctic Conditions: Part 2. Manufacturing Technology, Structure, Properties, and Serviceability of Sheet Products |
(Eng)
|
|
Sych O.
|
| 卷 10, 编号 6 (2019) |
Research of Recrystallization Processes in Low-Carbon Low-Alloy Steel in Modeling High-Temperature Rolling |
(Eng)
|
|
Korotovskaya S., Sych O., Khlusova E., Yashina E.
|
| 卷 10, 编号 6 (2019) |
The Effect of Microalloying on Mechanical Properties of Low-Carbon Chromium–Nickel–Molybdenum Steel |
(Eng)
|
|
Golosienko S., Minyakin N., Ryabov V., Semicheva T., Khlusova E.
|
| 卷 10, 编号 6 (2019) |
Structure and Properties of the Intermetallic Alloy Based on Nickel Aluminide Microalloyed with Rare Earth Metals |
(Eng)
|
|
Bazyleva O., Arginbaeva E., Shestakov A., Fesenko T.
|
| 卷 10, 编号 6 (2019) |
Basic Physicochemical Concepts for Controlling the δ-Ferrite Content When Welding with Austenite-Ferrite Materials |
(Eng)
|
|
Kazakov A., Fomina O., Zhitinev A., Melnikov P.
|
| 卷 10, 编号 6 (2019) |
Modeling of Steel Hardening Process at Thermal and Mechanical Treatment |
(Eng)
|
|
Oryshchenko A., Malyshevsky V., Shumilov E.
|
| 卷 9, 编号 6 (2018) |
Development of Ni-Base Superalloy with Operating Temperature up to 800°C for Gas Turbine Disks |
(Eng)
|
|
Bakradze M., Ovsepyan S., Buiakina A., Lomberg B.
|
| 卷 9, 编号 6 (2018) |
Influence of Hot Plastic Deformation Modes on the Structure and Properties of Quenched Hot Rolled Economically Alloyed High-Strength Steel |
(Eng)
|
|
Pazilova U., Khlusova E., Kniaziuk T.
|
| 卷 9, 编号 6 (2018) |
Structure Formation of the Nitrogen-Containing Austenitic 04Kh20N6G11M2AFB Steel at Hot Deformation: Part I. Influence of Deformation Temperature and Strain Rate on the Process of Dynamic Recrystallization |
(Eng)
|
|
Fomina O., Vikhareva T., Sagaradze V., Kataeva N.
|
| 卷 9, 编号 6 (2018) |
Structure Formation of the Nitrogen-Containing Austenitic 04Kh20N6G11M2AFB Steel at Hot Deformation: Part II. Influence of the Phase Composition and Conditions of Hot Deformation on the Process of Dynamic Recrystallization |
(Eng)
|
|
Fomina O., Vikhareva T.
|
| 卷 9, 编号 6 (2018) |
Structure and Properties of the Heat-Affected Zone of Low-Alloy Cold-Resistant Steel for Arctic Application |
(Eng)
|
|
Sych O., Khlusova E., Pazilova U., Yashina E.
|
| 卷 9, 编号 6 (2018) |
Structure Changes of High-Strength Economically Alloyed Steel 09KhGN2MD (09CrMnNi2MoCu) In Tempering |
(Eng)
|
|
Golubeva M., Sych O., Khlusova E., Motovilina G., Sviatysheva E., Rogozhkin S., Lukyanchuk A.
|
| 卷 9, 编号 6 (2018) |
Carburization of Heat-Exchanger Pipes of 09Kh18N9 Grade Steel in Contact with Sodium Coolant |
(Eng)
|
|
Kudryavtsev A., Okhapkin K.
|
| 卷 9, 编号 6 (2018) |
Refractory Monocarbides and Diborides of Transition Metals: Promising Components of High-Temperature Composite Materials |
(Eng)
|
|
Burkhanov G., Dementiev V.
|
| 卷 9, 编号 6 (2018) |
Concentration Redistribution of Alloying Elements in Pseudo-Alpha-Titanium Alloy under Elastoplastic Deformation |
(Eng)
|
|
Ivanova L., Benemanskaya G., Travin V.
|
| 卷 9, 编号 6 (2018) |
Research on Submicron-Grained Structure Formation in Titanium Alloys upon Reversible Hydrogenation and Plastic Deformation |
(Eng)
|
|
Panin P., Manokhin S., Dzunovich D.
|
| 卷 9, 编号 6 (2018) |
Structural Features of Niobium Carbide Disperse Particles in the Structure of Heat-Resistant Alloys Based on Fe–25Cr–35Ni System |
(Eng)
|
|
Kondratiev S., Sviatysheva E., Petrov S.
|
| 卷 8, 编号 6 (2017) |
Controlling behavior of δ-ferrite in nitrogen-containing chromium–nickel–manganese steels |
(Eng)
|
|
Kazakov A., Oryshchenko A., Fomina O., Zhitenev A., Vikhareva T.
|
| 卷 8, 编号 6 (2017) |
Structure and properties of new wear-resistant steels for agricultural machine building |
(Eng)
|
|
Ryabov V., Kniaziuk T., Mikhailov M., Motovilina G., Khlusova E.
|
| 卷 8, 编号 6 (2017) |
Development of the high-strength titanium pseudo-β-alloy and semifinished products thereof |
(Eng)
|
|
Kablov E., Nochovnaya N., Gribkov Y., Shiriaev A.
|
| 卷 8, 编号 6 (2017) |
Optimization of heat treatment hardening modes for semifinished products of Ti-5553 pseudo-β-alloy for marine applications |
(Eng)
|
|
Kudryavtsev A., Chudakov E., Kulik V., Tretyakova N., Berestov A., Fedorov S.
|
| 卷 8, 编号 6 (2017) |
Study of nanostructure of experimental Ti–5Al–4V–2Zr alloy |
(Eng)
|
|
Rogozhkin S., Schastlivaya I., Leonov V., Nikitin A., Orlov N., Kozodaev M., Vasiliev A., Orekhov A.
|
| 1 - 23 的 23 信息 |
|
