Email this article Engineering method of calculation of gasdynamic foil bearings of turbocompressors
- Authors: Merkulov V.I1, Plykin M.E.1, Tischenko I.V1,2
-
Affiliations:
- Moscow State University of Mechanical Engineering (MAMI)
- JSC RPO «Nauka»
- Issue: Vol 7, No 1-1 (2013)
- Pages: 126-132
- Section: Articles
- URL: https://journals.rcsi.science/2074-0530/article/view/68249
- DOI: https://doi.org/10.17816/2074-0530-68249
- ID: 68249
Cite item
Full Text
Abstract
In the article there is considered the engineering method of calculation of gasdynamic foil bearings. There are executed calculations according with this method and there is executed the comparison of results which were received by other authors.
Keywords
Full Text
##article.viewOnOriginalSite##About the authors
V. I Merkulov
Moscow State University of Mechanical Engineering (MAMI)
Email: tgtd@mami.ru
Dr.Eng., Prof.; +7 (495) 223-05-23, ext. 1297, 1573
M. E. Plykin
Moscow State University of Mechanical Engineering (MAMI)
Email: tgtd@mami.ru
+7 (495) 223-05-23, ext. 1297, 1573
I. V Tischenko
Moscow State University of Mechanical Engineering (MAMI); JSC RPO «Nauka»
Email: IV.Tishenko@npo-nauka.ru
Ph.D.
References
- Agrawal. Foil air/gas bearing technology. An overview. ASME, 345E. New York, 1007, publication 97-GT-347
- GT-2003-38606. Development of high-speed industrial turbo blowers with foil air bearing. ASME, Turbo Expo, 2003, USA
- Low-friction wear-resistant coating for high-temperature foil bearings, report N.Y, 12205, USA
- Технические справки и отчеты МГТУ «МАМИ» за 2010-2011гг.
- Ермилов Ю.И. Осевые лепестковые газодинамические подшипники, диссертация на соискание ученой степени кандидата технических наук, 2008г.
Supplementary files
