Email this article Alumo-Yttrium Garnet Crucibles Made by Slip Casting for Work with High-Purity Powders
- Authors: Trifonov Y.G.1, Dosovitskii G.A.1, Kuznetsova D.E.1, Tarasovskii V.P.2,3
-
Affiliations:
- ”IREA” Company
- Moscow State University of Mechanical Engineering
- ”Bakor” Scientific-Technical Center
- Issue: Vol 57, No 1 (2016)
- Pages: 81-84
- Section: Article
- URL: https://journals.rcsi.science/1083-4877/article/view/248207
- DOI: https://doi.org/10.1007/s11148-016-9932-7
- ID: 248207
Cite item
Open Access
Access granted
Subscription Access
Abstract
The method of slip casting is used to make dense ceramic crucibles of cerium-doped alumo-yttrium garnet. Use of the crucibles to heat-treat this material does not lead to its contamination at temperatures up to 1600°C. A laboratory technology for making the crucibles is described.
Keywords
About the authors
Yu. G. Trifonov
”IREA” Company
Email: tarasvp@mail.ru
Russian Federation, Moscow
G. A. Dosovitskii
”IREA” Company
Email: tarasvp@mail.ru
Russian Federation, Moscow
D. E. Kuznetsova
”IREA” Company
Email: tarasvp@mail.ru
Russian Federation, Moscow
V. P. Tarasovskii
Moscow State University of Mechanical Engineering; ”Bakor” Scientific-Technical Center
Author for correspondence.
Email: tarasvp@mail.ru
Russian Federation, Moscow; Shcherbinka District, Moscow
Supplementary files
