| Edição |
Título |
Arquivo |
| Volume 39, Nº 10 (2019) |
Selection of Working Frequencies in Complex Plane Motion of Saws within a Woodcutting System |
(Eng)
|
|
Blokhin M.
|
| Volume 39, Nº 10 (2019) |
Local Heat Transfer in the Combustion Chamber of a Hydrogen Diesel |
(Eng)
|
|
Kavtaradze R., Natriashvili T., Glonti M., Wang Y., Sakhvadze G.
|
| Volume 39, Nº 10 (2019) |
Determining the Displacement of the Rotor Shaft in an Electrical Machine |
(Eng)
|
|
Novozhilov A., Yussupova A., Novozhilov T.
|
| Volume 39, Nº 10 (2019) |
Stress–Strain State of Internal Rubber Shock-Absorbing Components in a Small Supporting Roller of a Caterpillar System |
(Eng)
|
|
Korostelev S.
|
| Volume 39, Nº 10 (2019) |
Finishing with Free and Bound Abrasive |
(Eng)
|
|
Muratov K., Gashev E., Ablyaz T.
|
| Volume 39, Nº 10 (2019) |
Depth of the Disintegrated Layer in the Abrasive Finishing of Single Crystals |
(Eng)
|
|
Muratov K., Ablyaz T., Gashev E.
|
| Volume 39, Nº 10 (2019) |
Predicting Metallic Defects in Casting BrA9ZhZL Alloy Tool Electrodes |
(Eng)
|
|
Shumkov A., Ablyaz T., Muratov K., Matygullina E., Trapeznikov N., Sharov K., Bogomyagkov A., Pustovalov D.
|
| Volume 39, Nº 10 (2019) |
Multitier Straight-Sprue Casting System |
(Eng)
|
|
Sharov K., Bogomyagkov A., Pustovalov D., Vasenin V., Ablyaz T., Shumkov A.
|
| Volume 39, Nº 10 (2019) |
Determining the Stress in Refractory Filters Used in Casting |
(Eng)
|
|
Bogomyagkov A., Pustovalov D., Sharov K., Drozdov A., Kryukov A.
|
| Volume 39, Nº 10 (2019) |
Laser Heat Treatment of Ferrocarbon Powder Steel |
(Eng)
|
|
Morozov E., Oglezneva S., Usynin E.
|
| Volume 39, Nº 10 (2019) |
Electric-Discharge Machining of Polymer Composites |
(Eng)
|
|
Ablyaz T., Muratov K., Shlykov E., Shipunov G., Shakirzyanov T.
|
| Volume 39, Nº 10 (2019) |
More Efficient Electric-Discharge Machining of 38Х2Н2МА Steel |
(Eng)
|
|
Shlykov E., Ablyaz T., Muratov K.
|
| Volume 39, Nº 10 (2019) |
Mechanical Properties of Products after Electric-Discharge Machining |
(Eng)
|
|
Ablyaz T., Vil’deman V., Muratov K., Il’inykh A.
|
| Volume 39, Nº 10 (2019) |
Wear Resistance of Steel Parts after Electrospark Alloying by Graphite Electrodes |
(Eng)
|
|
Karavaev D., Matygullina E., Doshchennikov M., Sinyushov D.
|
| Volume 39, Nº 10 (2019) |
Five Theorems of Turbulence and Their Practical Application |
(Eng)
|
|
Kochetkov Y., Kravchik T., Podymova O.
|
| Volume 39, Nº 10 (2019) |
Surface Roughness of Steel in Turning with Metal Buildup on the Tool |
(Eng)
|
|
Tokarev D., Drozdov A., Sirotenko L., Matygullina E.
|
| Volume 39, Nº 10 (2019) |
Turning of F-4UV20 Composite Plastic |
(Eng)
|
|
Ablyaz T., Matygullina E., Sirotenko L., Tokarev D., Drozdov A.
|
| Volume 39, Nº 10 (2019) |
Manufacture of Wear-Resistant Cast-Iron Grinding Balls without Shrinkage Defects |
(Eng)
|
|
Pustovalov D., Ablyaz T., Matygullina E., Sharov K., Bogomyagkov A.
|
| Volume 39, Nº 9 (2019) |
Pore Formation in the Laminar Structure of Wear-Resistant Modified Powder Coatings |
(Eng)
|
|
Vinokurov G., Struchkov N., Bol’shakov A.
|
| Volume 39, Nº 9 (2019) |
Surface Microhardness of Parts Machined by Asymmetric Uninterrupted Lapping |
(Eng)
|
|
Gafarov A., Sharifov Z., Gafarov V.
|
| Volume 39, Nº 9 (2019) |
Selection of a Cutting Tool by Means of a Digital Model |
(Eng)
|
|
Kabaldin Y., Shatagin D., Kuz’mishina A.
|
| Volume 39, Nº 9 (2019) |
Current Regulation in Contact Welding |
(Eng)
|
|
Klimov A., Antsiborov A., Klimov V., Kudinov A.
|
| Volume 39, Nº 9 (2019) |
Production of Large Disks from Cylindrical Blanks by Plastic Deformation. 4. Deformation of a Protrusion by an Annular Punch |
(Eng)
|
|
Vorontsov A.
|
| Volume 39, Nº 9 (2019) |
Influence of the Properties of Machining Fluids on the Frictional Coefficient in Alloy Turning |
(Eng)
|
|
Kisel’ A., Rogachev E., Evdokimova O., Sergeev V., Balova D.
|
| Volume 39, Nº 9 (2019) |
Frictional Properties of Laser-Applied Coatings |
(Eng)
|
|
Roshchin M.
|
| 51 - 75 de 991 resultados |
<< < 1 2 3 4 5 6 7 8 9 10 > >>
|
