Enviar artigo por via de e-mail More Efficient Electric-Discharge Machining of 38Х2Н2МА Steel
- Autores: Shlykov E.S.1, Ablyaz T.R.1, Muratov K.R.1
-
Afiliações:
- Perm National Research Polytechnic University
- Edição: Volume 39, Nº 10 (2019)
- Páginas: 895-897
- Seção: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/227877
- DOI: https://doi.org/10.3103/S1068798X1910023X
- ID: 227877
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
On the basis of experimental data, recommendations are made regarding the electric-discharge machining (EDM) of 38Х2Н2МА alloy-steel parts with improved high-temperature wear resistance. Those recommendations ensure high quality of the machined surface with the highest possible productivity. In the finishing pass, to ensure roughness Ra = 2.4, the following parameters are chosen: voltage U = 100 V; time of pulse action T = 150 µs; and current I = 6 A.
Palavras-chave
Sobre autores
E. Shlykov
Perm National Research Polytechnic University
Autor responsável pela correspondência
Email: Kruspert@mail.ru
Rússia, Perm
T. Ablyaz
Perm National Research Polytechnic University
Autor responsável pela correspondência
Email: lowrider11-13-11@mail.ru
Rússia, Perm
K. Muratov
Perm National Research Polytechnic University
Autor responsável pela correspondência
Email: Karimur_80@mail.ru
Rússia, Perm
Arquivos suplementares
