Finishing with Free and Bound Abrasive


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

Abrasive finishing of a single crystal by means of free and bound abrasive is compared in conditions with forced and free workpiece rotation. Experimental data show that the influence of forced and free workpiece rotation is different for finishing by means of free and bound abrasive. In machining by bound abrasive with forced rotation, the cutting rate and productivity are 25% higher, on average, than with free rotation.

Sobre autores

K. Muratov

Perm National Research Polytechnic University

Autor responsável pela correspondência
Email: Karimur_80@mail.ru
Rússia, Perm

E. Gashev

Perm National Research Polytechnic University

Autor responsável pela correspondência
Email: unpl_mtf@pstu.ru
Rússia, Perm

T. Ablyaz

Perm National Research Polytechnic University

Autor responsável pela correspondência
Email: lowrider11-13-11@mail.ru
Rússia, Perm

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Allerton Press, Inc., 2019