Email this article Stress–Strain State of Internal Rubber Shock-Absorbing Components in a Small Supporting Roller of a Caterpillar System
- Authors: Korostelev S.A.1
-
Affiliations:
- Polzunov Altai State Technical University
- Issue: Vol 39, No 10 (2019)
- Pages: 821-826
- Section: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/227807
- DOI: https://doi.org/10.3103/S1068798X19100150
- ID: 227807
Cite item
Open Access
Access granted
Subscription Access
Abstract
The stress–strain state of rubber components in the internal shock absorbers of a small-diameter supporting roller in a caterpillar system is analyzed. An algorithm for its calculation is proposed. The stress–strain states due to axial compression in roller assembly and the radial operational force are considered. The influence of axial compression of the rubber components on the radial rigidity of the supporting roller is determined.
About the authors
S. A. Korostelev
Polzunov Altai State Technical University
Author for correspondence.
Email: korsan73@mail.ru
Russian Federation, Barnaul
Supplementary files
