Email this article An Electronically Adjustable Shock Absorber
- Authors: Sarbaev V.I.1, Garmash Y.V.2, Blinnikova L.G.2
-
Affiliations:
- Department of Ground Means of Transportation, Moscow Polytechnic University
- Margelov Ryazan Higher Airborne Twice Red Banner Order of Suvorov Command School
- Issue: Vol 90, No 4 (2019)
- Pages: 353-355
- Section: Article
- URL: https://journals.rcsi.science/1068-3712/article/view/231561
- DOI: https://doi.org/10.3103/S1068371219040126
- ID: 231561
Cite item
Open Access
Access granted
Subscription Access
Abstract
This article considers a device for controlling electrical automotive shock absorbers that employs an energy-efficient means of saving fuel and allows adjusting the suspension stiffness, depending on the driving conditions for the automobile and its sprung weight. The indicated adjustments can be made automatically. The energy generated by the shock absorber piston’s motion is used to charge the battery. The voltage optimal to the battery is obtained using an electricity converter.
About the authors
V. I. Sarbaev
Department of Ground Means of Transportation, Moscow Polytechnic University
Author for correspondence.
Email: journal-elektrotechnika@mail.ru
Russian Federation, Moscow, 107023
Yu. V. Garmash
Margelov Ryazan Higher Airborne Twice Red Banner Order of Suvorov Command School
Email: journal-elektrotechnika@mail.ru
Russian Federation, Ryazan, 390031
L. G. Blinnikova
Margelov Ryazan Higher Airborne Twice Red Banner Order of Suvorov Command School
Email: journal-elektrotechnika@mail.ru
Russian Federation, Ryazan, 390031
Supplementary files
