A technique for calculating tribotechnical characteristics of tractive cylindrical gear of VL-10 locomotive


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

A technique for the design calculations of the local strength, wear, and durability of tractive cylindrical double gear of VL-10 locomotive with angular tooth correction has been suggested. The technique allows for realistic engagement conditions (parity and wear-induced changes in the tooth profile curvature). The regularities of the effect that structural (angular engagement correction) and operational (linear tooth wear) factors have on these parameters for triple–double–triple tooth engagement in this gear have been revealed. It has been established that, when considering tooth correction, there are certain optimum displacement coefficients that maximize the durability compared to the uncorrected gear. It has been shown that, if one allows for changes in the tooth-profile due to wear are allowed for, the actual durability and bearing capacity of the gear is higher. The results have been presented graphically in order to help establish regularities of the effect of engagement conditions on the tribotechnical characteristics.

Sobre autores

M. Chernets

Drohobych Ivan Franko State Pedagogical University; Politechnika Lubelska

Autor responsável pela correspondência
Email: chernets@drohobych.net
Ucrânia, Drohobych, 82100; Lublin, 20-618

Yu. Chernets

Drohobych Ivan Franko State Pedagogical University

Email: chernets@drohobych.net
Ucrânia, Drohobych, 82100

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Allerton Press, Inc., 2017