Enviar artigo por via de e-mail Investigation of the Adhesive Strength of Antifriction Coatings Depending on the Energy Parameters of Electro-Spark Alloying
- Autores: Verhoturov A.D.1, Vlasenko V.D.2, Konevtsov L.A.3
-
Afiliações:
- Institute of Water and Ecological Problems of the Far-Eastern Branch of the Russian Academy of Science
- Computation Center of Far Eastern Branch of the Russian Academy of Science
- Institute of Materials Science of the Research Center of Far-Eastern Branch of the Russian Academy of Science
- Edição: Volume 39, Nº 3 (2018)
- Páginas: 232-240
- Seção: Article
- URL: https://journals.rcsi.science/1068-3666/article/view/229084
- DOI: https://doi.org/10.3103/S1068366618030145
- ID: 229084
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The research results of adhesive strength of single-layer coatings made of Cu, Ni, ВK6,Ti, Т15K6, W, Cr, 11Х15Н25М6АГ2 materials formed by electrospark alloying depending on the energy parameters of electrospark alloying process and subsequent ball rolling have been presented. The obtained results of comparative tests have shown the possibility of increasing the adhesive strength of the surface layer by 1.5 times.
Palavras-chave
Sobre autores
A. Verhoturov
Institute of Water and Ecological Problems of the Far-Eastern Branch of the Russian Academy of Science
Email: vlasenko@as.khb.ru
Rússia, Khabarovsk, 680000
V. Vlasenko
Computation Center of Far Eastern Branch of the Russian Academy of Science
Autor responsável pela correspondência
Email: vlasenko@as.khb.ru
Rússia, Khabarovsk, 680000
L. Konevtsov
Institute of Materials Science of the Research Center of Far-Eastern Branch of the Russian Academy of Science
Email: vlasenko@as.khb.ru
Rússia, Khabarovsk, 680042
Arquivos suplementares
